The black I2 Instrument Microphone, Standard Gain, with 3.5mm Locking Connector for Senal AWS-2000T Wireless Transmitters from Countryman is a mic that has been engineered from the ground up for natural on- and off-axis frequency response, low-noise, and precise polar patterns with deep nulls. This tiny instrument microphone can be used to capture audio in sound reinforcement applications for saxophone, violin, viola, cello, double bass, acoustic guitars, piano, brass, and percussion instruments.

The I2 instrument microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version offers a standard gain and is suitable for close miking and loud instruments like horns. It is supplied with a foam windscreen, a basic clip, and a carrying case. In addition, the 5' cable is permanently attached to the mic and terminates to a 3.5mm locking connector for direct connection to Senal AWS-2000T wireless bodypack transmitters.

Hypercardioid Polar Pattern    For Instruments and Sound Reinforcement    Natural On-/Off-Axis Frequency Response    For Uncolored Recordings    Reduced Feedback Issues

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques can be aided by the various selection of instrument mounts (sold separately), which position securely and gently to strings, brass, and more.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning, and consistent patterns.

The hypercardioid polar pattern has a narrower pickup pattern in its front than the cardioid polar pattern. It offers better rejection of ambient noise and the working distance is about twice that of the omni polar pattern. The hypercardioid has a small “pickup lobe” directly behind the microphone and exhibits maximum rejection areas behind and to the sides (about 60 degrees away from the rear of the microphone on either side) of the mic. The hypercardioid pattern works best when the loudest unwanted sounds—like speakers—can be positioned in these nulls.

Related Questions and Answers

Q: 1. I have a Benro MeFOTO RoadTrip Pro Carbon Fiber Series 1 Travel Tripod. Will this work?

A: The Peak Design PL-S-3 Standard Plate will fit the head included with the Benro MeFOTO RoadTrip Pro Carbon Fiber Series 1 Travel Tripod.

Q: 2. Will this film work with a kodak brownie?

A: Most vintage Kodak Brownie 8mm movie cameras can use this film. The reel needs be manually flipped over from one side to the other in order (in a darkened room or closet)r to expose the entire 10 meter reel..

Q: 3. Which is your best quality XLR to USB microphone adapter?

A: If you only need a mic, then this is the one!

Q: 4. The product photo shows it splitting into two pieces, but I'm trying with the one I have, and I can't seem to separate them. Do you have any tips for me? Also, if I can separate them, can I use the bowens mount adaptor that comes with the AD400pro to attach and lock this reflector?

A: The original does not split into two. The following system has a pinch and release system that is very hard at first needs to be broken in to loosen the reflector.

Q: 5. Does this type of film work with a brownie movie camera 8mm?

A: If the camera you have accepts 8mm film, not Super 8, yes this film should work in it.

Q: 6. Will this film work in a bolex reflex s1 camera?

A: Yes, the Fomapan R100 is compatible with the Bolex Reflex S1 camera.

Q: 7. Is this film 16mm wide?

A: Yes

Q: 8. Hi,I have some Canon 600EX-RT's that I'd like to use with this bar. Can flashes be mounted beneath the bar so that they hang upside down? Basically, I want two on top and two on the bottom.

A: Yes, flashes can be mounted while hanging below the bar. The Mounts can be unscrewed and put on upside down. Either way though, you want to make sure that you use both the hotshoe's tightening screw and the flash's tightening screw to keep it secured. If you only screw down one of your fasteners, then there is still a chance that the flash could fall out of the hotshoe. (We found that out the hard way.)

Q: 9. I have an 8mm camera (kodak brownie) that takes a 25 foot roll. Is the reel for the 33 foot roll the same size or will it be too large for my camera?

A: This roll is 10 meters long or about 32 feet 9 and 3/4 inches.

Q: 10. We do not see any headphone jack in the pictures

A: The Senal XU-1648 XLR-USB Interface does have a 3.5mm TRS headphone jack located on the side, next to the headphone volume control dial. If you enlarge the second photo, you can see the tiny headphone logo (shown sideways) on the top left side in the photo. It is difficult to see clearly in the photo without enlarging it. Here is a link to the second photo: https://static.bhphoto.com/images/multiple_images/images1000x1000/1376474531_IMG_331866.jpg