This VEO 3 GO 204AB Aluminum Tripod/Monopod with T-45 Ball Head from Vanguard is a support system that features a tripod with a detachable leg and removable center column that can be combined to form a monopod with a 52.8" height. Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included quick release plate, which is secured to the tripod/monopod's ball head using an Arca-type quick release clamp. The T-45 Ball Head is removable, provides up to a 91° tilt for portrait orientation and 360° of rotation, and can be locked into place along its range of movement. Also provided is a smartphone connector and a Bluetooth remote, allowing the monopod formed by the detachable leg and removable center column to be used as a smartphone selfie stick.

When configured as a tripod, the VEO 3 GO 204AB Aluminum Tripod/Monopod with T-45 Ball Head supports up to 6.6 lb and measures 13.6" when folded. Each of its 4-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. Together, the three legs can be extended to obtain a maximum height of 39.8 or 51.6" when used with the center column fully raised. The legs feature rubber feet. For added versatility, the center column is reversible, facilitating lower-angle photography where an attached camera is positioned among the tripod's legs instead of above them.

A carry bag is provided for storage and transport.

Load Capacity: 6.6 lb    Max Height: 51.6", Min Height: 13"    Folded Length: 13.6"    Leg Sections: 4, Weight: 2.1 lb    Reversible Column    Aluminum Alloy Legs, Twist Locks    Monopod/Selfie Stick-Convertible Leg    T-45 Ball Head    QS-64 Arca-Type Quick Release Plate    Connector and Remote for Smartphone

• Supports up to 6.6 lb
• Push-and-pull, twist-lock rapid center column with ballast hook for rapid camera, lens, or sport optic positioning
• Can be set for a maximum height of 39.8", or 51.6" with the center column fully raised
• Center column is reversible, facilitating lower-angle photography where an attached camera is positioned among the tripod's legs instead of above them
• Legs each feature 4 sections, with twist locks for fast deployment, and can be independently spread
• Legs can be locked at 21, 50, or 80° angles
• Rubber feet help to enhance stability on a wide variety of surfaces
• Weighs 2.1 lb, measures 13.6" when legs are reversed 180° and folded
• Arca-type T-45 Ball Head provides up to a 91° tilt for portrait orientation and 360° of rotation, and it can be locked into place along its range of movement
• Removable center column and one detachable tripod leg can be configured as a monopod with a 52.8" height along with the included ball head
• Included smartphone connector and Bluetooth remote allow the monopod formed by the detachable leg and removable center column to be used as a smartphone selfie stick

• Aluminum alloy legs
• T-45 Arca-type ball head
• QS-64 Arca-type quick release plate
• 1/4"-20 to 3/8"-16 reversible mount for center column allows attachment of accessories that feature 3/8"-16 accessory threads
• Included carry bag for storage and transport of the tripod with ball head

Related Questions and Answers

Q: 1. What's the height without extending the center column?

A: The Max Height of the Magnus Aluminum Travel Tripod with Monopod and Arca-Type Ball Head without Center Column is 55.7" / 141.5 cm

Q: 2. What are the dimensions of the quick release plate?

A: As per the manufacturer, the plate on the K&F Concept SA254M2 is 1.89 x 1.89 x 0.39".

Q: 3. Can this be used with an adapter to mount binoculars?

A: The K&F Concept SA254M2 DSLR Camera Aluminum Tripod with Monopod and Ball Head Kithas a standard 1/4"-20 screw, so you could mount binoculars with the correct adapter.

Q: 4. Where is this tripod made?

A: According to the manufacturer this tripod is made in Myanmar (Burma), but this is subject to change.

Q: 5. What is the Arca plate made of?

A: The plate is made of metal.

Q: 6. reversible center column, does that mean I can pop it out, then insert it upside down so the ball head is near the ground?

A: Yes. The K&F Concept SA254M2 allows the user to reverse the center column and thus use the camera practically at ground level.

Q: 7. Can the center column screw to the monopod? It is fairly short for a tall guy like me.

A: Yes, the center column of the SA254M2 DSLR Camera Aluminum Tripod with Monopod and Ball Head Kit can be attached to the monopod to extend the length to 185cm (72.8").

Q: 8. Can I use a Benro (or other) gear head on this tripod?

A: Yes other heads can be used on this tripod such as those from Benro.

Q: 9. Is there a bubble level in the tripod? Or only in the ball head?

A: The K&F Concept SA254M2 DSLR Camera Aluminum Tripod with Monopod and Ball Head Kit only has one bubble level on the head.

Q: 10. Will this tripod work with my Canon PowerShot SX530 HS camera?

A: The Magnus Aluminum Travel Tripod with Monopod and Arca-Type Ball Head is compatible with the Canon PowerShot SX530 HS camera.