This VEO 3 GO 265HCB Carbon Fiber Tripod/Monopod with BH-120 Ball Head from Vanguard is a support system that features a tripod with a detachable leg and removable center column that can be combined to form a monopod with a 66.9" height. Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included quick release plate, which is secured to the tripod/monopod's ball head using an Arca-type quick release clamp. The BH-120 Ball Head is removable, provides up to a 91° tilt for portrait orientation and 360° of independent rotation, and can be locked into place along its range of movement. Also provided is a smartphone connector and a Bluetooth remote, allowing the monopod formed by the detachable leg and removable center column to be used as a smartphone selfie stick.

When configured as a tripod, the VEO 3 GO 265HCB Carbon Fiber Tripod/Monopod with BH-120 Ball Head supports up to 22.0 lb and measures 16.1" when folded. Each of its 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. As a tripod, it can be set to a minimum height when its removable, push-and-pull, rapid center column is substituted with the included Low-Angle Adapter. Together, the three legs can be extended to obtain a maximum height of 49.6 or 65.5" when used with the center column fully raised. Each of the carbon fiber legs includes a rubber foot, and to further enhance stability on a wide variety of surfaces, including soft or uneven soil, a set of spiked feet is also provided.

For added versatility, the center column is reversible, facilitating lower-angle photography where an attached camera is positioned among the tripod's legs instead of above them.

A carry bag is provided for storage and transport.

Load Capacity: 22.0 lb    Maximum Height: 65.5"    Folded Length: 16.1"    Leg Sections: 5, Weight: 3.1 lb    Reversible Column, Low-Angle Adapter    Carbon Fiber Legs, Twist Locks    Monopod/Selfie Stick-Convertible Leg    BH-120 Ball Head    QS-60 V2 Arca-Type Quick Release Plate    Connector and Remote for Smartphone

• Supports up to 22.0 lb
• Push-and-pull, twist-lock rapid center column with ballast hook for rapid camera, lens, or sport optic positioning
• Can be set for a maximum height of 49.6", or 65.5" with the center column fully raised
• Can be set to a minimum height when its removable, push-and-pull, rapid center column is substituted with the included Low-Angle Adapter
• Center column is reversible, facilitating lower-angle photography where an attached camera is positioned among the tripod's legs instead of above them
• Legs each feature 5 sections, with twist locks for fast deployment, and can be independently spread
• Legs can be locked at 21, 50, or 80° angles
• Rubber feet help to enhance stability on a wide variety of surfaces
• Spiked feet are also provided to further enhance stability on a wide variety of surfaces, including soft or uneven soil
• Weighs 3.1 lb, measures 16.1" when legs are reversed 180° and folded
• Arca-type BH-120 Ball Head provides up to a 91° tilt for portrait orientation and 360° of independent rotation, and it can be locked into place along its range of movement
• Removable center column and one detachable tripod leg can be configured as a monopod with a 66.9" height along with the included ball head
• Included smartphone connector and Bluetooth remote allow the monopod formed by the detachable leg and removable center column to be used as a smartphone selfie stick

• Carbon fiber legs
• BH-120 Arca-type ball head
• QS-60 V2 Arca-type aluminum alloy quick release plate with 1/4"-20 mount, D-ring, and rubberized, anti-slip surface
• 1/4"-20 to 3/8"-16 reversible mount for center column allows attachment of accessories that feature 3/8"-16 accessory threads
• Included carry bag for storage and transport of the tripod with ball head

Related Questions and Answers

Q: 1. Anyone have a problem with the rubber texturing coming off?

A: We have not had any reports of the rubber coming off of this head.

Q: 2. Can I use this tripod with PowerShot SX70 HS?

A: Yes, the X-GO Max Tripod Kit can work with the Canon Powershot SX70 HS.

Q: 3. I'm wanting to replace an older SBH-100 ball head that is on an Alta Pro 264AT tripod with the newer Arca-Swiss Alta BH-100 head but I wanted to know if I can attach the "three legged thing" (QR-11 LC) L bracket to it without any issues?

A: There should not be any issues. This head has an Arca-Type Compatible Clamp, the QR-11 LC L Bracket has an Arca-Type Compatible Plate. This head and that plate are compatible.

Q: 4. Can the ball head accomodate Small rig L plate for Canon R6 ? https://www.bhphotovideo.com/c/product/1583498-REG/smallrig_2976_l_bracket_for_canon_eos.html

A: Yes the SmallRig L bracket will be compatible with the Vanguard Alta BH 300 ballhead.

Q: 5. What is the diameter of the base plate?

A: The Vanguard Alta BH-100 Ball Head has a base diameter of 2.3 inches.

Q: 6. What is the diameter of the base?

A: This head has a base diameter of 2.6 inches / 66mm.

Q: 7. Does this tripod supports a Nikon D850 with a 70-200mm lens?

A: The K&F Concept D225C2 Carbon Fiber Tripod with Arca-Type Ball Head and Monopod will hold a Nikon D850 with a 70-200 lens, but if you want it to be the most rock solid without any movement at all I recommend purchasing a stronger and heavier tripod.

Q: 8. What is Max Height without Center Column extended?

A: Just under 49 inches.

Q: 9. Could I remove the ball head and attach a FH-02 Video Fluid head to this tripod without any extra adapters?

A: Yes. The K&F Concept D225C2 Carbon Fiber Tripod with Arca-Type Ball Head and Monopod allows you to remove the ball head. The K&F Concept FH-02 Video Fluid Head can be used in it's place without buying any extra parts.

Q: 10. Can I mount this upside down with a robo camera mounted on it??

A: The Vanguard Alta BH-100 Ball Head is designed to be mounted on a tripod.