Transmit high-resolution video using this Ghost-Eye 700M Transmitter from CINEGEARS. The transmitter sends up to a 1080p60, 10-bit, 4:2:2 signal up to 2296' away with less than 1 ms of latency, a Gold mount battery plate, and it operates on the license-free 5 GHz frequency band. The transmitter can utilize optional AES128/256 encryption to ensure a secure connection.

The transmitter has 3G-SDI and HDMI inputs and an SDI loop output, as well as a 2-pin LEMO power input. Other features include HDMI/SDI cross-conversion, cross-compatibility with other Ghost-Eye models, multicasting to an unlimited number of Ghost-Eye receivers, and auto-relink which, in case of signal drop, reconnects the receiver once it's back within range. A LEMO to D-Tap cable is included to use external power.

Up to 1080p60 10-Bit 4:2:2 Transmission    2296' Max Distance with <1 ms of Latency    3G-SDI and HDMI Inputs, SDI Loop Output    Optional AES-128 Encryption    Dual 3G-SDI Outputs, HDMI Output    LEMO Power Inputs, Auto Re-Link    HDMI/SDI Cross-Conversion    Unlimited Multicasting    Ghost-Eye Cross-Compatibility

• Transmit up to a 1080p60, 10-bit, 4:2:2 signal up to 1148'
• Less than 1 ms of latency
• Operates on the license-free 5 GHz frequency band
• 3G-SDI and HDMI input, SDI loop output
• Optional AES-128/256 signal encryption
• 2-pin LEMO power input
• HDMI/SDI cross-conversion
• Cross-compatibility with other Ghost-Eye models
• Multicasting to an unlimited number of Ghost-Eye receivers
• Auto-relink
• EDID 1.1 compatible
• Heavy-duty casing

Related Questions and Answers

Q: 1. what type of battery it uses?

A: This system uses Sony NP-F style batteries like the NP-F770. https://bhpho.to/2bRUc5Z

Q: 2. Can Video Transmission Kit 150M V2 supports Version 1 Receivers on Each Channel signal receive?

A: Yes it should. According to Cinegears this is compatible with any Ghost Eye receiver, including the first version.

Q: 3. This looks like the ikan Blitz 400 3G-SDI/HDMI Wireless Uncompressed Zero Delay Video System, what's the difference?

A: Not familiar with the other, but not a fan of the Ikan stuff in general. Honestly, this has been a better piece than we expected. It also does signal conversion so you can go in SDI and come out HDMI at the other end. Order an extra antenna or two and make yourself some power adaptor cables to get to 4 pin XLR if the rest of the gear is in that world. Hope this helps. Good luck!

Q: 4. Description says Timecode and Tally are supported. Manufacturer says they are not. Please verify...?

A: I have the Ghost-Eye 150m and I have tested it for timecode. I can confirm that TC is supported. I don't know about tally.

Q: 5. This unit is compatible with cameras blackmagic 2.5k, 4K, Ursa, Ursa mini, Sony FS7, FS5, FS700, EX3, and all RED ???Do you have any feedback on the reliability of this product?

A: Since this unit has both SDI and HDMI inputs and can read all common FPS rates, we are of the opinion that this should work with all of the cameras you mentioned. No feedback here yet as to reliability.

Q: 6. Are both units silent? Fan or no fan?

A: They are silent for there are no fans.

Q: 7. Is the frequency tunable? Can I select a specific frequency in the 5GHz range?

A: You cannot select a specific frequency. You can pick from the 10 preset frequencies I don't know exactly what the frequencies are but they are probably not in the 5Ghz range.

Q: 8. What's the maximum distance?

A: This system has a Line Of Site range of 2000 feet or 600 meters.

Q: 9. Hii have bought this piece from bh . i am using it with arri alexa but when i record my camera the video signal is not triggering my shogun inferno when the shogun is connected through ghost eye 150 v2. Do u have any solution or setting for this

A: I have no idea about this issue i am using with blackmagic and red and not facing any issue. thanks

Q: 10. hi, has the monitor got hdsdi loop through?

A: This transmitter/receiver set does not have a monitor or loop through.