The cocoa Countryman E6X Directional Earset Mic, Medium Gain with Detachable 1mm Cable and TA4F Connector for Shure Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a TA4F connector for direct connection to Shure AD1, ADX1, AXT100TA4F, GLXD1, PGXD1, QLXD1, and ULXD1 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Shure Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. which cable should i get in order for this to work with iPhone 14?

A: To connect the Shure Motiv MV88+ to an iPhone via a Lightning connection, BH #SHAMVLTG would be the appropriate cable to use.

Q: 2. Any adapter to use this mis with a DSLR?

A: No. The MV88 is designed to work with mobile devices and will not interface with a camera.

Q: 3. Can this be used with my Tascam DR-22WL with a 1/8' microphone input? Would like to improve the quality of live recordings.

A: Yes the microphone will be plugged in on the top of the Tascam recorder into the 3.5mm mic input. The audio and video will be recorder separate in this scenario so be sure to have software to sync the audio to the video.

Q: 4. Can this be used to zoom or FaceTime on iPhone 11? I need to livestream a small wedding. I’ve tried the mv88 and that didn’t work with FaceTime. Also do you have to go through the motiv app to use it or is it just plug&play? Thanks.

A: No, unfortunately the MV88 does not work for livestreaming.through Zoom or FaceTime on the iPhone. According to Apple, external mics do not work with iOS for video conferencing apps, although they can be used with iOS for telephone-type apps without video. For live video streaming on the iPhone, only the built-in mic will work.

Q: 5. Is it possible to do a live stream from the iPhone (say, to Facebook) with the MV88+ providing the audio source?

A: Yes. When connected to your phone, it replaces the on-board mic.

Q: 6. What are the ADC specs? I.e. sample rate, bit depth?

A: The Shure MVX2U MOTIV XLR to USB-C Streaming Adapter is capable of 16- or 24-bit at 48 kHz for analog to digital conversion.

Q: 7. Can this be mounted to the SmallRig Video Kit Lite for iPhone 13 Pro case in some way (hot shoe adaptor, etc.)?

A: Yes, the Shure MOTIV MV88+ Video Kit Digital Stereo Microphone and Accessories for Smartphones could be integrated with the SmallRig Video Kit Lite for iPhone 13 Pro. The mic clip for the MOTIV MV88+ includes a shoe adapter that would mount onto the Smallrig's cold shoe nicely.

Q: 8. Will the MVX2U work with a USB-C to USB-A cable adapter for a laptop that only has USB A 2.0 port?

A: Yes, you can use a USB-C to USB-A cable adapter or a cable with USB-C and USB-A connectors with the Shure MVX2U MOTIV XLR to USB-C Streaming Adapter for connection to a laptop that only has a USB-A 2.0 port.

Q: 9. Please, someone plug this into the Osmo Pocket and see if it works?!

A: Short answer is yes. Longer answer is it wont be that simple and there will be limitations. Long answer with details is as follows: 1) You will need the microphone input adapter from DJI 2) This mics hardware and settings are controlled via an app which means that you will have to set it up (pickup pattern, effects and etc.) by connecting it to your phone. 3) Once it is set up the settings remain in the mic and you won't have on the fly controls when using this mic with an osmo. 4) You will need a power supply or external battery power bank to power the mic. 5 You will also need to get a 3.5mm stereo mini to stereo mini cable

Q: 10. Can this take a mixed, multiple-source XLR output from an event space, and make it usable for webinar streaming?

A: The Shure MVX2U MOTIV XLR to USB-C Streaming Adapter can only accept a mic level signal. For a line level signal, such as the output from a mixer, a proper audio interface such as BH #MAM2, BH #IKIRS, etc. should be used.