Power your speakers with the ultra-efficient Ashly CA-1.02, a 2-channel power amplifier that delivers up to 1000W of power per channel (2000W bridged). The unit incorporates Ashly's proprietary ultra-efficient D-MAX amplifier technology for the cleanest and most reliable performance with lower power draw. Additionally, the CA-1.02 can power a variety of speaker types including Low Z (2, 4 & 8 Ohms) to Hi Z (70 or 100V).

The CA-1.02 is 2 RU and can be mounted into a standard 19" rack enclosure. The rear panel features combo XLR-1/4" inputs and removable Euroblock input and output connections as well as remote VC ports and switchable 80 Hz HPF and Clip Limiter on each channel. The front panel provides a volume control knob for each channel and comprehensive LED indicators for levels and amplifier status.

D-MAX Ultra-Efficient Amplifier Design    Cleaner and More Reliable Performance    2, 4, 8 Ohms + 70/100V    2000W Bridged    80 Hz HPF and Limiter per Channel    Remote VC and Standby Ports    Front-Panel LED Indicators    SailFlow Directed Fan Cooling System    Includes Block Connectors + Power Cord

• 2-channel, 1000W per channel (4 & 8 ohms)
• Active power factor correction (PFC)
• Low-impedance output (to 2 ohms)
• Direct 70 or 100V output
• Extremely efficient and lightweight
• Neutrik Combo XLR-1/4" jack and Euroblock input connectors
• Euroblock speaker output connectors
• Front-panel soft-power switch, defeatable
• Front-panel level controls, fully off = mute, defeatable
• Front-panel LEDs for clip/mute, signal, current, temperature, bridge mode, protect, and front-panel disable
• 80 Hz 2nd order hi-pass filter per channel (on/off)
• Clip limiter per channel (on/off)
• Input gain settings per channel: 26, 32, 38 dB, or 1.4V
• Remote DC level control per channel
• Remote standby contact closure, with polarity setting
• Universal 100-240 VAC operation, 50-60 Hz, detachable AC connector
• Continuously variable cooling fan
• Protection: inrush current limitation, overtemperature, output short-circuit/overpower, output DC, mains fuse
• Safety/Compliance: cTUVus, CE, FCC Class B, RoHS
• Ashly 5-year warranty

Ashly's all-new, proprietary D-MAX technology brings together smart, cutting-edge amplifier design, a brand-new ultrafast switching power supply with Silicon-Carbide semiconductors and diodes, and intelligent power management to deliver ultimate efficiency.

• When current and voltage are exactly in phase, current demand is reduced and efficiency increased. Dynamic Power Factor Correction tracks current continuously to maintain accurate monitoring & control.
• Silicon Carbide semiconductors boost both speed and efficiency and are significantly faster than the old-school pure silicon of the past.
• Traditional silicon semiconductors don’t shut off instantly. They have a lag time called “switching loss”, leading to a residual tail current (red portions in the drawing at left). From an audio-quality standpoint, this makes for a sloppier, less precise sound; from an efficiency standpoint it sucks up unnecessary power.
• Instead, Ashly is pioneering the use of Silicon Carbide (SiC) semiconductors. They have unique electrical characteristics that render them able to switch on and off far faster than conventional silicon. The result is an amplifier design that’s faster (thus better audio fidelity) and more efficient.

• Power amplifiers need cooling. In most amps, heat-reducing air flow takes a convoluted path in and around internal components. Front to back, back-to-front-side-to-side…those nice, perforated grilles look simple until you look inside the amp and see the helter-skelter air flow.
• Ashly didn’t want cooling air to just wander around inside the CA chassis, so they came up with their unique SailFlow architecture, which directs internal airflow strictly over the areas that generate the most heat, rather than arbitrarily over the whole amp. This keeps the already highly efficient CA Series even cooler and assures reliable, stable operation, even under heavy loads.

Related Questions and Answers

Q: 1. Which battery do i need to work with the Canon M50?

A: You need the DRE12 dc coupler. Click on the link below to view; https://bhpho.to/2uI7hgZ

Q: 2. will this work with a Canon EOS Ra?

A: The Canon Eos Ra would need this AC adapter kit instead: https://bhpho.to/3MJ0uYy

Q: 3. This is ORIGINAL from Canon? Made by Canon? Thanks

A: Yes. This is made and distributed by Canon USA

Q: 4. will this work with the xf-400 / xf-405 / gx10?

A: The only power adapter that we know works with the XF400, XF405 and GX10 is the Canon CA-946 which those cameras come with. We are not aware of any other Power Adapter solutions for that camera at this time.

Q: 5. Does this work with the cannon t6i

A: The t6i does not show up on the compatibility list on the Canon website..

Q: 6. What transformer is to be used with this speaker?

A: The Solid Drive SD1 is designed for 8 ohm applications. We do not carry transformers for these units. For 70v/100v systems please contact the manufacturer directly toll free 855.663.5600 or sales@a href= http://mseaudio.com target= _blank mseaudio.com/a for support.

Q: 7. Will this work on a Canon XF305 ?

A: The Canon AC Adapter CA-PS700 is incompatible with the Canon XF305 Professional Camcorder. Instead, get the Canon CA-946 Compact Power Adapter for Select Canon Cinema EOS Cameras and Camcorders, BH #CACA946.

Q: 8. Can this also charge the older model Canon BP-A30 batteries? The non-N version?

A: Yes, the Canon CA-CP300B Compact Battery Charger will be able to charge both older BP-A batteries and new BP-AN batteries that are required for the C400.

Q: 9. Will this work with a Canon EOS C300 Camcorder?

A: Unfortunately no. The CA-935 is not designed for the C300. You need The Canon CA-A10 Compact Power Adapter. See below. https://www.bhphotovideo.com/c/product/1159865-REG/canon_0871c002_ac_adapter_for_eos.html

Q: 10. Does this adapter work with the r5c?

A: The Canon AC Adapter CA-PS700 is not compatible with the Canon R5 C camera.