Two Speakers One Channel

Ashly Fa-125.2 2-channel Installation Amplifier (1 Ru, 1/2 Rack)

Product Code: ga196619
Availability: In Stock

$1,497.00 $2,275.44

Qty

0 reviews Write a review

Description
Reviews (0)

Save space on your next audio amplifier installation with the Ashly FA125.2, a 2-channel multipurpose installation amplifier in a compact 1 RU (1/2 rack) enclosure. The efficient Class-D amplifier supplies 125W of power per channel and 250W to a bridged channel pair, allowing you to power Hi-Z speakers at 4, 8, and 16 ohms or Lo-Z speakers at 70/100V. The FA-125.2 can also share power between channel pairs up to a total of 250W total per pair for even more flexibility.

The rear panel provides easy Euroblock input and output connectors as well as Remote DC level control per channel. The front panel provides you with LED indicators for signal, limit, mute, input clipping, and protect. The FA-125.2 includes a set of Euroblock connectors and a power cord.

125W per Channel or 1 x 250W Bridged 4/8/16 Ohms, 70/100V Class-D Circuitry Euroblock Inputs and Outputs Euroblock Remote DC Connector Fan Cooling + Protection Circuitry Automatic Power Sharing Includes Power Cord and Block Connectors

Key Specs
Number of Channels	2
Amplifier Power Rating	4 Ohms / 8 Ohms / 16 Ohms / 70 V / 100 V: 125 W Peak per Channel (Full Range) 250 W Peak Bridged (Full Range)
Load Impedance / Voltage	4 / 8 / 16 Ohms per Channel 70 / 100 V
DSP	Yes
Analog Audio I/O	1x Block 6-Pin Balanced Line/Mic Input 1x Block 8-Pin Speaker Output 1x Block 8-Pin Control Input/Output
Digital I/O	No
Network I/O	No
Rackmount Size	1 RU (1/2-Rack)
Amplifier
Number of Channels	2
Amplifier Power Rating	4 Ohms / 8 Ohms / 16 Ohms / 70 V / 100 V: 125 W Peak per Channel (Full Range) 250 W Peak Bridged (Full Range)
Amplifier Class	Class-D
Load Impedance / Voltage	4 / 8 / 16 Ohms per Channel 70 / 100 V
Performance
Protections	DC Fault, Overload, Short Circuit, Thermal, Undervoltage
Frequency Response	20 Hz to 20 kHz ±0.5 dB (8 Ohms, -3 dB Below Rated Power)
Damping Factor	> 250
Input Sensitivity	0.316 Vrms to 1.28 Vrms / -10 dBV or +4 dBu
Max Input Level	+24 dBu
SNR	> 102 dBA (at 8 Ohms)
THD+N	< 0.05%
Crosstalk	< 65 dB
Signal Processing
DSP	Yes
Crossover	Yes
Limiting	Yes
Connectivity
Analog Audio I/O	1x Block 6-Pin Balanced Line/Mic Input 1x Block 8-Pin Speaker Output 1x Block 8-Pin Control Input/Output
Digital I/O	No
Network I/O	No
USB I/O	1x USB-C (Service)
Mobile App Compatible	No
Wireless	No
Power
AC Input Power	100 to 240 VAC, 50 / 60 Hz
AC Power Connector	1x IEC 15 A / NEMA 5-15
Power Consumption	150 W (Typical) 0.5 W (Standby)
Physical
Rackmount Size	1 RU (1/2-Rack)
Cooling	1x Fan (Variable Speed)
Operating Conditions	32 to 104°F / 0 to 40°C
Dimensions	8.7 x 1.7 x 10.3" / 22.0 x 4.4 x 26.2 cm
Weight	3.5 lb / 1.6 kg
Packaging Info
Package Weight	5.19 lb
Box Dimensions (LxWxH)	19.4 x 13.7 x 3.4"

2 x 125W (half-rack)
Active power factor correction (PFC)
Power-sharing on 125W models
Low-Z or High-Z (70V/100V) output mode per channel
Euroblock input and output connectors
Front-panel soft-power switch
Front-panel level controls, fully off = mute
Front-panel status LED per channel for signal, limit, mute, input clipping, protect
Input sensitivity select: +4 dBu or -10 dBv
Standby mode contact closure with normally open/normally closed polarity switch
Automatic sleep mode (non-defeatable)
Front-panel lock
Remote DC level control per channel (2 channel model), per channel pair (4 channel models)
Protect mode fault logic output
Universal 100-240 VAC operation, 50-60 Hz
Detachable AC connector
USB connector for firmware update
Variable cooling fan
Rackmount or table/wall mount kit available for half-rack models
Rear support kit available for all models
Protection: over-temperature, output short-circuit/over-power, output DC, mains fuse
Limited 5-year warranty

Related Questions and Answers

Q: 1. Is it compatible with Asus Rog Strix G512LW-ES76 ?

A: Yes, this is compatible with the Strix G512.

Q: 2. Will this fit into OWC ENVOY EXPRESS thunderbolt 3 M.2 NVME ssd enclosure?

A: No, the OWC Envoy Express Thunderbolt 3 M.2 NVME SSD Enclosure will not work with the Samsung 2TB 980 PRO PCIe 4.0 x4 M.2 Internal SSD with Heatsink since the heatsink will not fit into the enclosure.

Q: 3. Is this compatible with an Asus ProArt Studiobook?

A: Yes, the Samsung 1TB 980 PRO PCIe 4.0 x4 M.2 Internal SSD will be compatible with the Asus ProArt StudioBook.

Q: 4. Hi Is this SDD compatible and suitable for this laptop nitro 5 an5515-58? Or which one do you recommend? Thanks

A: Yes, the Samsung 2TB 980 PRO PCIe 4.0 x4 M.2 Internal SSD would be compatible with an Acer Nitro 5 laptop.

Q: 5. Is this equivalent to 1 TB PM991a NVMe model: MZ9LQ1T0HBLB-00B07?

A: Yes, the Samsung 990 PRO is similar to the Samsung PM9A1.

Q: 6. Will SofRaid XT allow me to set this up as RAID 5 / 10, populating all 4 slots with 1TB SSDs?

A: This drive comes with SoftRAID Lite XT which only allows Raid 0 and 1. You would need to upgrade with OWC directly to SoftRAID XT to use RAID 5, and RAID 1+0.

Q: 7. Is this compatible with the HP G7 Zbooks?

A: This is compatible with a G7 Zbook.

Q: 8. Works with Mac Pro 2013 ?

A: The Samsung 2TB 980 PRO PCIe 4.0 x4 M.2 Internal SSD is not compatible with your Mac Pro 2013.

Q: 9. Will the Samsung 990 SSD with the heatsink fit in a Dell XPS 8930 or 8960?

A: Yes, the Samsung 1TB 990 PRO PCIe 4.0 x4 M.2 Internal SSD with Heatsink will fit inside your Dell XPS computers.

Q: 10. Is it suitable for NAS caching use?

A: Yes, this product is suitable for storage or caching in compatible NAS devices.

There are no reviews for this product.