The black I2 Instrument Microphone, High Gain, with LEMO 3-Pin Connector for Lectrosonics and Sennheiser SSM and SK 2000 Wireless Transmitters from Countryman is a mic that has been engineered from the ground up for natural on- and off-axis frequency response, low-noise, and precise polar patterns with deep nulls. This tiny instrument microphone can be used to capture audio in sound reinforcement applications for saxophone, violin, viola, cello, double bass, acoustic guitars, piano, brass, and percussion instruments.

The I2 instrument microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version features increased sensitivity for distance miking and capturing detail in quieter instruments. It is supplied with a foam windscreen, a basic clip, and a carrying case. In addition, the 5' cable is permanently attached to the mic and terminates to a LEMO 3-pin connector for direct connection to Lectrosonics and Sennheiser SSM and SK 2000 wireless bodypack transmitters.

Omnidirectional Polar Pattern    For Instruments and Sound Reinforcement    Natural On-/Off-Axis Frequency Response    For Uncolored Recordings    Reduced Feedback Issues

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques can be aided by the various selection of instrument mounts (sold separately), which position securely and gently to strings, brass, and more.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning, and consistent patterns.

The omnidirectional polar pattern picks up sound from all directions equally offering the flattest frequency response, lowest noise level, and is least susceptible to wind noise and vibration. It is recommended for recording and sound reinforcement of acoustic instruments such as percussion, guitar, saxophone, and piano.

Related Questions and Answers

Q: 1. Will this work with GoPro's?

A: Yes. Once the Gopro tripod mount is attached to the Vello VB-2000 ActionPan Pro Stabilizing Action Grip/Handle, you can then connect your GoPros.

Q: 2. Will this mount to a tripod?

A: Yes it includes a tripod mount on the bottom of the knurled screw.

Q: 3. Anyone have experience mounting two receivers side-by-side on an EVA1? Want to make sure they would fit before purchasing the dual kit…

A: Yes this 3 shoe extension. Goes on the camera shoe and then you can mount both receivers onto 2 of the 3 shoes. BH #VECB465 you can find it on the B&H website.

Q: 4. How would you plug in the transmitter into a PA system Mixer? I'm thinking all I'd need is a 3.5mm male-to-3 pin XLR (male or female) short cable...with the 3.5 end plugged into the transmitter, and the the XLR end plugged into an XLR "out" on the board???

A: The AVX transmitter only excepts a mic level signal, so you would have to add a PSC ALMP Line to Mic Level Pad In-Line Barrel Adapter, B&H # PSALMP, along with a cable which you correctly mentioned. The Remote Audio 3-Pin XLR Female to 3.5mm TRS Locking Adapter Cable for Sennheiser Transmitter (2'), B&H # RECASEK100L would be a good choice .

Q: 5. It should be noted, that while this system includes 2 transmitters, only 1 can be used at a time. -- Does this mean I can't use two lavs at the same time, or one lav and one handheld during a shoot?

A: The transmitters work independently. You can use two of the mics at the same time in any combination, so long as you can accept two lines of audio into the device you are using.

Q: 6. I want to buy SennheiserAVX Camera-Mountable Digital Wireless Handheld and Lavalier SetBut can I use it in Australia Because this combo (with omnidirectional mic handheld) didn't sell in Australia yet so I just want to confirm.Thanks

A: This system is designed for the USA and may not be compliant with wireless radio regulations in Australia. B&H cannot ship Sennheiser products outside the USA.

Q: 7. If I want 4 lavs across two cameras, will buying these work or will I get some feedback?

A: The Sennheiser AVX series wireless microphone systems are single-channel so only one transmitter can be used with each receiver. The Sennheiser AVX 2-Person Digital Camera-Mount Wireless Combo Microphone System with Case Kit will allow you to mic two people and both receivers can be connected to the same camera. In order to mic four people at the same time using the AVX systems, you will need to have four individual AVX systems (or two of the AVX 2-Person Kits). So you can use two of the AVX 2-Person Kits with your two cameras. Up to eight of the AVX systems can be used simultaneously within a 98-foot range. Interference and feedback would not be a problem.

Q: 8. Is there a way to listen to the audio while simultaneously recording with the XLR adaptor on a DSLR?

A: Generally the answer is no. The AVX, like most wireless systems, outputs a mic level signal. It is not designed for direct audio monitoring. If you want to monitor the signal you have a couple of options: Use the headphone output from your DLSR (if it has one), use a mixer between the AVX wireless receiver and the DSLR ( JuicedLink, Beachtek,and Sound Devices offer a great range of products, these usually have a built in headphone amplifier for audio monitoring), or use a field video monitor that includes audio monitoring from the camera's HDMI port. I would just double check if your DLSR is actually sending audio down the HDMI port.

Q: 9. How does audio quality and range compare with conventional Sennheiser Evolution series wireless? The compact receivers are attractive, but I am concerned about apparent lack of lack of traditional wireless features like diversity receivers.

A: The AVX digital wireless systems are compander-free and offer pristine audio reproduction. The transmitter outputs at 100 mW (average) so should be minimal to zero trade off with regards to range.

Q: 10. Does it have the arca swizz plate to fit in tripod? what is the load bearing capacity ?

A: Although this action grip does not come with an Arca Swiss type plate at the bottom, you can attach one via the 1/4" female thread below the camera knob.