The black ETC Source Four Fresnel with stage-pin connector, features a traditional Fresnel optic with a unique reflector design and HPL lamp technology to provide the equivalent output of a 1000W standard Fresnel fixture using a 750W lamp for heat and power savings compared to most Fresnal units. Made of rugged die-cast aluminum, the fixture features a bulb socket access door, which allows you to change the bulb without changing the focus position. This saves time as there is no need to refocus the lamp after a bulb swap.

The 9 to 52° beam angle provides excellent spot to flood coverage and is easily adjustable using the full-sized zoom knob. You can adjust the position where the yoke attaches to the fixture, and this allows you to change the balance, or if necessary, adjust the fixture's position for clearance forward or back. A gel holder is included, but barndooors are not included although available separately. As the fixture supports 100-240 VAC, 50/60 Hz power, you can take this light with you wherever there is a common outlet. Please note that an HPL bulb is required for use and is available separately.

9 to 52° Beam Angle Spread    7" Fresnel Lens    Supports 375, 575, and 750W HPL Bulbs    Includes Gel Frame

• Rugged die-cast aluminum construction
• Convenient full-size zoom adjustment knob
• Innovative HPL socket enables fast and easy bulb changes
• Sliding yoke mount for variable balance point
• Fully enclosed accessory slots for no light leak
• UL and cUL listed

• 100-240 VAC, 50/60 Hz
• High-temperature, three-conductor 36" leads in a glass-fiber outer sleeve
• Supports ETC Dimmer Doubling technology

• 7" (175mm) aperture
• Zoom range: 9 to 52° beam angle, 20 to 65° field angle
• Fresnel optical system for good beam-shaping performance
• Glass reflector with dichroic coating optimized for HPL performance

• Uses same bulb as all Source Four tungsten fixtures
• 750W maximum
• Patented filament geometry makes for extremely efficient light collection and transmission
• Integral die-cast aluminum heat-sink lamp base

Related Questions and Answers

Q: 1. Has anyone used this successfully with a non-pro version AD600?

A: Starting with it in a slightly zoomed out position, the Godox FLS8 Fresnel Lens (B&H# GOFLS8) can easily fit on the Godox AD600BM Witstro Manual All-In-One Outdoor Flash (B&H# GOAD600BM) or Godox AD600B Witstro TTL All-In-One Outdoor Flash (B&H# GOAD600B) as long as the manufacturer's stated 104 degrees Fahrenheit (40 degrees Celsius) maximum temperature is kept in mind. It should be kept in mind that when components are left in hot cars, used with strobes firing at high rates or with high powered LED COBs left on for extended periods, or in direct sun for enough time, their temperatures will exceed the ambient temperature.

Q: 2. will this work with the Godox A100 or AD100?

A: Yes, the Profoto Clic Fresnel fits on the Godox AD100.

Q: 3. How do the throw distance and shape of light fall-off of this Clic Fresnel compare to the Clic Reflector?

A: The Profoto Clic Fresnel produces a 34° Beam Angle for the Profoto A2 and adds 1.7/1.2 stops output. The Profoto Clic Magnum Reflector produces a 37° Beam Angle and adds 1.8 stops of light. Both are not projectors so you can not create shapes like those. You can change the beam by using a grid on the Magnum Reflector.

Q: 4. Will this work with the new Aputure 600D?

A: It will work with limitations, they recommend this one for the the 600D Aputure F10 Fresnel Attachment for LS 600d LED Light B&H # APF10F

Q: 5. Is this compatible with the FV200 from Godox?

A: Yes, the Godox FLS8 Fresnel Lens is compatible with the Godox FV200 High Speed Sync Flash/Daylight LED Monolight.

Q: 6. Is this compatible with Godox SZ150R and SZ200Bi lights?

A: Yes, the Godox FLS8 can work with both the Godox SZ150R and the SZ200Bi.

Q: 7. Is this compatible with aputure amaran 60s?

A: Yes, the Godox FLS8 Fresnel Lens (BH #GOFLS8) is compatible with Aputure Amaran 60s lights with Bowens mounts, such as the amaran COB 60d S Daylight LED Monolight (BH #AMAPA0020A10).

Q: 8. Will this fit the VL300s?

A: Yes, the Godox FLS10 Fresnel Lens can fit the Godox VL300.

Q: 9. Is the lens glass or acrylic?

A: The Profoto Clic Fresnel is closer to a hard acrylic material.

Q: 10. Will this fit on the Godox V1?

A: Yes, the Profoto Clic Fresnel is compatible with the Godox V1.