The SHAPE Compact Revolt Shoulder Baseplate is a lightweight baseplate suitable for use by neophytes and professionals alike. Made from CNC-machined aluminum, the baseplate is made to withstand the rigors of the production day. The shoulder pad allows it to sit comfortably on your shoulder. The top of the baseplate features two rubber strips to protect your camera. It incorporates two ARRI-compatible rosettes for attaching handle accessories. The top of the baseplate features a 3.5"-long slot that enables adjusting your camera's position for balance adjustments.

Front and rear 15mm LWS rod clamps enable you to mount the included 8 and 4" pairs of rods to support you lens accessories in front, and power/monitoring accessories in the rear. An included 3mm Allen Key allows you to adjust the rod clamps, and the rear rod clamp is removable and attaches to the Revolt Shoulder Baseplate by two M4 screws. On the bottom of the baseplate is a V-lock plate that is compatible with most VCT baseplates. The V-lock plate has both a 1/4"-20 and 3/8"-16 threaded mounting hole.

VCT-Compatible V-Lock Plate    Rear Insert Plate, Follow Focus Pro    FX9 Camera Cage, Handle with Rosette    15mm Rod System, Shoulder Mount

The ARRI-compatible rosettes feature M6 threading

Front and rear 15mm rod clamps have spring-loaded locking levers

Slip-free gel shoulder pad

The shoulder plate is equipped with 1/4-20 and 3/8-16 threaded holes, allowing extra screws to be stored, and a magnet is provided at the back to attach the included Allen key

Designed with a standard V-lock plate that is compatible with most VCT tripod plates

Includes both 4 and 8" 15mm support rod pairs

Camera platform tilts on hinges to allow access to the camera tie-down screws, and it is held in place by powerful magnets that hold the plate closed

Related Questions and Answers

Q: 1. I noticed in the video produced by Shape there is a film plane set screw for a tape measure. I did NOT that receive very specific screw with the Shape FX9 tpo bracket. If it's not part of the top plate where can I purchase one?

A: Hello Paul, Thank you for reaching out to us! As discussed on the phone on monday, the set screw is normally supplied with the FX9 camera. You can try to contact Sony directly if they can send you one. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 2. Will this work with the Zacuto VCT Pro Shoulder Rig?

A: Yes, they both use an ARRI Rosette mount.

Q: 3. could my Canon 6D fit in this cage?

A: We're afraid not. This is a form fitting cage specific to the A7RIII and A7III cameras, it will not work with a 6D. Instead we suggest you look at building a system around the SHAPE DSLR Kirk Neff Baseplate + Cage 2.0, B&H # SHDSLRKN20, which is a Universal Cage that will work with the Canon 6D. https://bhpho.to/2RGnZbl

Q: 4. Is this compatible with the Lumix GH5?

A: Yes, the YELANGU D221 Shoulder Rig with Camera Cage and Follow Focus is compatible with the Panasonic Lumix GH5.

Q: 5. With the follow focus located on the same side of the camera as the remote grip, It seems a bit awkward that the single operator must let go of the remote grip in order to follow focus while holding the camera with the left hand. Can the follow focus controller be moved from side to side? It does not look like it can be.

A: Hi, For marketing purposes we have put the Follow focus on this side of the rig, so that people can see the product. However you can easily change the side of it as it is attached with a clip on.I hope this answer your question.Best regards.

Q: 6. Hey there, we're upgrading from the FS5K to the FS7M2K with extension unit. Will this new setup somehow fit on the Shape Fs5 Rig with the additional rear insert plate?Thanks for your answer,Pascal

A: Hello Pascal,Thank you for your question! Our FS5 Baseplate is essentially our generic baseplate adapted for the Sony FS5 given the Sony FS5 Adaptor plate. Without it, our generic baseplate fits basically 90% of the cameras out there including the Sony FS7 and FS7M2. We also have a brand new FS7M2 Remote Extension Handle bracket available. Since Sony changed their design for the handle, we adapted ours so it fits perfectly. You can check it out on our website later today as they will be displayed.a href= http://www.shapewlb.com/en/home.aspx target= _blank http://www.shapewlb.com/en/home.aspx/aWe hope this answers your questions, and we thank you for your interest in our products.The SHAPE team

Q: 7. Is this compatible with the Sony FX3?

A: The SHAPE Cage Kit with Matte Box & Follow Focus for Sony a7R III/a7 III Camera is not compatible with the Sony FX3.

Q: 8. Is it possible to get this rig with a 4x56 matte box instead?

A: This is a kit put together by Shape which we do not offer with 4 x 5.65 matte box. However, you could always purchase BH #SHA73SM instead and add a different matte box, along with a different follow focus. https://bhpho.to/2KHbx5z

Q: 9. What kind of wooden hand grips will fit this cage?

A: If you were to add a Low-Profile NATO Rail (2") to the side of this cage, BH #SMLPNR50MM, you could then use the SmallRig Wooden Side Handle with NATO Clamp, BH #SM2187B. NATO Rail - https://bhpho.to/2TKeeIC Nato Side Handle - https://bhpho.to/2W5XFIG

Q: 10. will this work on the blackmagic pocket camera 6k?

A: It will not. The cage in this kit is geared towards Mirrorless Photo cameras like the A7 Series form Sony and GH5 from Panasonic. The cage will not be wide enough to handle the Pocket Cinema Camera 6K.