This 12G SDI Rear-Twist BNC to BNC Connector Cable from FSI Solutions is designed for 12G-SDI/4K applications requiring extended bandwidth and is rated for 12G-SDI runs over 150 feet.

The 6' cable features Neutrik's rearTWIST UHD BNC connectors that provide increased headroom, easy installation, and additional return loss reserve to overcome potential impedance deviations without signal interruption. The rearTWIST technology means the connectors don't require a special tool for installation, simply use the rear boot twist.

The cable is constructed with Belden's low-loss 4855R coax cable featuring an updated braid design, silver-plated copper conductor, and a polyethylene formula that provide significant RL improvement and 8 dB less cable attenuation when compared to similar cables. This connector cable is fully compatible with SMPTE ST-2082-1 and ST-2081-1 standards.

For 12G-SDI/4K Extended-Bandwidth Uses    Neutrik rearTWIST UHD BNC Connectors    Belden Low-Loss 4855R Coax Cable    Braid-Design Cable    Silver-Plated Copper Conductor

Related Questions and Answers

Q: 1. Is the rail on the bottom of this handle Nato Compatible?

A: Not that we are aware of. This handle is specifically for the Movcam Top Plate for Sony VENICE B&H # MOV3033602. It has the proper connection to connect to that product. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphotovideo.com.

Q: 2. Hmm. The answers make me confused, cause I have the NATO rail like on this photo. Someone of you don't have NATO rail like on this photo?

A: This Movcam top handle does not come with a small NATO rail. This is made to attach to rigs that already have an existing NATO rail.

Q: 3. Maybe a silly question, but how do you 'twist' the handle? I've tried removing the big screw in the middle, but that doesn't work.

A: pull up on the horizontal part of the handle after you loosen the screw. its notched into the vertical base part

Q: 4. What's the length of the nato rail?

A: The NATO rail is 2 5/8 long with the mounting slot/hole at 1 5/8 in length. The screws are 1/4 20 - which when, not being used, live (and can be seen) in the handle. It's a quality piece of kit.

Q: 5. Hmm. The answers make me confused, cause I have the NATO rail like on this photo. Someone of you don't have NATO rail like on this photo?

A: I don't have the rail like the photo. This item is incomplete

Q: 6. Will this handle fit on dsmc2 gemini whithout any plates?

A: The built in cheese plate on the top allows for 2 placements of this handle if you have the monitor mounted on top, one right next to the dsmc 2 top monitor and it also connects the the 1/4th screw mounts next to the battery mount.

Q: 7. Can this scale an HDMI in to HDMI out? (With no SDI connections) We need to go from 1080p60 HDMI to 2160p29.97 HDMI.

A: The Decimator 12G-CROSS 4K HDMI/SDI Cross Converter with Scaling and Frame Rate Conversion, is able to convert any SMPTE formats from HDMI to HDMI or SDI output, and can convert an input of 1080p60 through HDMI to an output of 2160p29.97 HDMI.

Q: 8. Does this monitor have the option to flip the image (to use for teleprompter)?

A: Yes, the Lilliput Q10 10.1" Ultrahigh Brightness On-Camera Monitor with 2 x 12G-SDI, 1 x HDMI (1500 cd/m²) has image flip settings as detailed in page 14 of the user manual here: https://bit.ly/4eyJ91T.

Q: 9. Does this come with the Sony NPF battery plate?

A: Yes, the Lilliput Q10 10.1" Ultrahigh Brightness On-Camera Monitor with 2 x 12G-SDI, 1 x HDMI (1500 cd/m²) includes a Sony NP-F battery plate.

Q: 10. Is this an 8-Bit or 10-Bit Monitor?

A: The Lilliput Q10 10.1" Ultra High Brightness On-Camera Monitor (BH #LIQ10 • MFR #Q10) displays 8-bit color.