The black I2 Instrument Microphone, Standard Gain, with LEMO 1-Pin Connector for Sennheiser BF 1083 Wireless Transmitters from Countryman is a mic that has been engineered from the ground up for natural on- and off-axis frequency response, low-noise, and precise polar patterns with deep nulls. This tiny instrument microphone can be used to capture audio in sound reinforcement applications for saxophone, violin, viola, cello, double bass, acoustic guitars, piano, brass, and percussion instruments.

The I2 instrument microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version offers a standard gain and is suitable for close miking and loud instruments like horns. It is supplied with a foam windscreen, a basic clip, and a carrying case. In addition, the 5' cable is permanently attached to the mic and terminates to a LEMO 1-pin connector for direct connection to Sennheiser BF 1083 wireless bodypack transmitters.

Omnidirectional Polar Pattern    For Instruments and Sound Reinforcement    Natural On-/Off-Axis Frequency Response    For Uncolored Recordings    Reduced Feedback Issues

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques can be aided by the various selection of instrument mounts (sold separately), which position securely and gently to strings, brass, and more.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning, and consistent patterns.

The omnidirectional polar pattern picks up sound from all directions equally offering the flattest frequency response, lowest noise level, and is least susceptible to wind noise and vibration. It is recommended for recording and sound reinforcement of acoustic instruments such as percussion, guitar, saxophone, and piano.

Related Questions and Answers

Q: 1. It should be noted, that while this system includes 2 transmitters, only 1 can be used at a time. -- Does this mean I can't use two lavs at the same time, or one lav and one handheld during a shoot?

A: The transmitters work independently. You can use two of the mics at the same time in any combination, so long as you can accept two lines of audio into the device you are using.

Q: 2. Is it possible to use two complete sets at the same time?

A: Yes, it is possible to use two Sennheiser XSW-D Digital Camera-Mount Wireless Microphone Systems at the same time. Up to five XSW-D Systems can be used simultaneously within a 250' range.

Q: 3. Is there any (easy) way to convert the EKP XLR Receiver output line into a headphones output? NOT THROUGH A CAMERA OR ANOTHER DEVICE. Just with an adapter o cable? Thanks!

A: Unfortunately not. The output level on the Sennheiser EKP receiver is fixed at mic level. Additionally, there is no way to monitor audio on this system unless one is doing it thru a mixer or a headphone output on the input device.

Q: 4. Do the receivers rotate? I have a Canon XA30 I'm looking to use with two mics at the same time, and the two mic inputs are side by side. How will two receivers hook up at the same time?

A: The Sennheiser AVX receivers do rotate on the XLR jack almost a full rotation. You can easily connect both receivers to the mic inputs on the XA30 or similar camera.

Q: 5. Does this kit come with the battery packs?... one pack for each unit? -Thanks!

A: It comes with 1 battery for each transmitter/receiver. Extra transmitter batteries are part # SEBA30 and receiver batteries are part # SEBA20.

Q: 6. Does this come with 2 xlr receivers so the two mics can be used at one time?

A: This is the combo system. Ships with a single receiver unit along with handheld and belt worn transmitter. Only one transmitter would be operational at a time.

Q: 7. This is a two-part question first question, can I mix receivers with the transmitter such as can I use XLR receivers to a lapel transmitter. And question number two I use a zoom recorder can the receivers be used on the h4n digital recorders and use the sound in post digital recorders

A: This system only comes with one receiver (SEWXSDRMJ), the other two are transmitters and you can only use one at the time with the receiver. The receiver always has to connect into the camera/recorder since it has a output and the transmitters are only design to intake a signal since they have a input. Yes the receiver can connect to the zoom recorder, you might want to buy the cable or the adapter in the links bellow to connect into the XLR input on the zoom recorder. https://www.bhphotovideo.com/c/product/233893-REG/Sennheiser_CL100_CL_100_1_8_M_Mini_to.html https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html?sts=pi&pim=Y

Q: 8. How would you plug in the transmitter into a PA system Mixer? I'm thinking all I'd need is a 3.5mm male-to-3 pin XLR (male or female) short cable...with the 3.5 end plugged into the transmitter, and the the XLR end plugged into an XLR "out" on the board???

A: The AVX transmitter only excepts a mic level signal, so you would have to add a PSC ALMP Line to Mic Level Pad In-Line Barrel Adapter, B&H # PSALMP, along with a cable which you correctly mentioned. The Remote Audio 3-Pin XLR Female to 3.5mm TRS Locking Adapter Cable for Sennheiser Transmitter (2'), B&H # RECASEK100L would be a good choice .

Q: 9. will this hold a sony ecm-673?

A: While the Rycote Standard Hole SGM 18cm Foam Windscreen will work with the diameter of the Sony ECM-673 Short Shotgun Microphone, the windscreen's length will leave less than an inch at the end of the ECM-673 for attaching a shock mount or mic clip. A shorter, more ideal option for the Sony ECM-673 would be the Rycote 104408 10cm Standard Hole SGM Foam (BH #RYSGM10IJ01): https://bhpho.to/3x63G9d

Q: 10. I want to buy SennheiserAVX Camera-Mountable Digital Wireless Handheld and Lavalier SetBut can I use it in Australia Because this combo (with omnidirectional mic handheld) didn't sell in Australia yet so I just want to confirm.Thanks

A: This system is designed for the USA and may not be compliant with wireless radio regulations in Australia. B&H cannot ship Sennheiser products outside the USA.