The Bracket 1 A2 Camera-Mounting Kit lets you attach two Lectrosonics LR, LT, or M2 Series wireless microphone receivers to your camcorder.

Designed for handheld or tripod shooting, this rugged mount is constructed with lightweight aluminum and stainless steel hardware. It attaches to the tripod mounting hole of your camera, while allowing your tripod plate to screw to the bottom of the bracket. The adjustable foot lets the camera sit level when you set it down, with or without a tripod plate attached. This model locates the mounting surface on the right side of the camcorder, in front of your hand, next to the lens.

This versatile camera accessory bracket can also be configured with additional shoe mounts and accessory adapters, allowing a variety of video and audio accessories to be attached simultaneously. While designed for the LR, LT and M2 series receivers, the 2nd receiver can be any model that fits in a shoe mount.

One clip mount, one shoe mount, and one 3/8" to 1/4"-20 thread tripod hole adapter are included. 

Mounts Two LR, LT, or M2 Receivers to Select Canon, Sony, JVC & Panasonic Cameras

Canon: C100, C200, C300, XA30, XA35, XF100, XF105, XF200, XF-205, XF-305, XF400, XF405, XF705, XHA1, XHG1

JVC GY-HC500, GY-HC550, GY-HC900, GY-HM170, GY-HM180, GY-HM200, GY-HM250 GY-HM600, GY-HM620, GY-HM650, GY-HM660, GY-LS300

Panasonic: AG-CX350, AG-DVX100, AG-DVX200, AG-HMC40, AG-HMC150, AG-HPX170, AG-HVX200, AG-UX180, AJ-PX230, AJ-PX270, HC-X1000

Sony: DCR-VX2200E, FDR-AX1, HVR-A1U, HVR-V1U, HVR-Z1U, HXR-NX3/1, NEX-EA50, PXW-Z100, PXW-Z190, PXW-Z280

Other similar-sized camcorders

Related Questions and Answers

Q: 1. will it work with a older flash unit the nikon sb-28?

A: Yes, the Vello FreeWave Fusion basic is compatible with the Nikon SB-28.

Q: 2. will this work with profoto A1 ?

A: Yes, unit will trigger of system by using the single pin terminal. The unit will be all manual and no TTL will be offered.

Q: 3. Will this trigger work with the Nikon D750?

A: Yes. You will need the RCC-N2 connecting cable (aka Vello CQ0915), which comes with the unit, and plugs into the Accessory Terminal on the left side of the camera. See page 2 of the D750 manual, #4 - cover, and #14 - Accessory Terminal. Same set-up used with the WR-1 and WR-R10 Nikon remotes, MC-DC-2 remote, and GPS units.

Q: 4. i have Sony A99 and flash F56AM, will this work on it? If not which adaptor do i need? Thank you.

A: The A99 has the new Sony Multi-terminal shoe. The HVL-F56AM flash has the older Sony shoe. This remote was designed for the Multi-terminal shoe. The A99 is compatible. The flash is not. It is not recommended but the B&H # VEHSACSMSA would adapt the flash to the receiver. Mounting the flash in this way will exert a lot of pressure on the shoe and it could easily break.

Q: 5. Is this unit compatible with the a7III?

A: This kit would be compatible with Sony cameras which have the Multi-Interface Shoe, like the A7 III.

Q: 6. Can these be used with studio strobe packs?

A: Yes, the Vello Freewave Fusion Basic Wireless Flash Trigger with Two Receivers Kit for Canon can work with studio strobe packs.

Q: 7. If you attach your flash to the camera hot shoe, as usual, and attach the receiver to the camera (Nikon 600) via cable and use the receiver to trigger the shutter, why would the flash NOT use TTL? How does it know it is being fired by this instead of my finger or my Nikon infrared transmitter?--Thanks in advance.

A: I think the confusion lies in the fact that this product has two purposes. Used as simply a remote shutter trigger, then yes your TTL flash should operate normally in the shoe. However, if you are using this product to operate your TTL flash off camera with the transmitter in the hot shoe, then this product will not transmit the TTL information to the flash and you have to set the flash manually (1/2 1/4, etc). There are systems that will do that but you'll need to increase your budget substantially.

Q: 8. Will this work with a Canon 80D?

A: Yes, this can work with the Canon EOS 80D.

Q: 9. Does this work with the Nikon D850, and a Sb-700 speed light?

A: Yes, this device is compatible with the Nikon D850 and the Nikon SB-700 AF Speedlight.

Q: 10. Will this Vello FreeWave Fusion Basic 2.4 GHz W.T.S. for Sony work on the DSC R1? I've had some bad luck in the past.

A: Unfortunately, this product is not compatible with the Sony DSC-R1.