Suit up your Panasonic GH4, GH5, or GH5S camera with this Full Cage for Panasonic GH Series from Tilta. This formfitting, dedicated cage protects four sides of your camera without interfering with its operation and is compatible with Tilta Type I Side Handles. The cage provides two cold shoe mounts and multiple 1/4"-20 and 3/8"-16 mounting threads for adding accessories like top and side handles, monitors, and microphones.

The base of the GH Series cage incorporates several mounting threads that enable you to easily fine-tune the balance of your setup when mounting your camera on a gimbal. A variety of optional baseplates can be attached to the bottom of the cage to add rod mounting and/or a power supply. This cage includes a Tiltaing hand strap.

Full-Frame Cage Design    Quick Release Top Handle    Run/Stop F570 Battery Side Handle    Arca-Swiss & Manfrotto QR Baseplates    2 x Top-Mounted Cold Shoes    Multiple 1/4"-20 & 3/8"-16 Threads    HDMI Cable Clamp & HDMI-R/S Cable Clamp    HDMI Male-to-Female Cable    Run/Stop Cable    Aluminum & Stainless Steel Construction

Panasonic GH Series cameras

Tilta Type I side handles

Related Questions and Answers

Q: 1. Does this mount on CAMVATE Universal Camera Cheese Plate with 1/4"-20 & 3/8"-16 Threads?

A: The Tilta Lens Adapter Support for Tiltaing Canon 5D/7D Cage (Black) is only designed to work with Tilta cages. The screws are not 1/4 20 or 3/8 16.

Q: 2. Will this work with the Ninja Ultra?

A: Both the Atomos Ninja V 5" 4K HDMI Recording Monitor and Atomos Ninja Ultra 5.2" 4K HDMI Recording Monitor have the same exact dimensions. The Tilta Tiltaing Monitor Cage for Atomos Ninja V will fit the Atomos Ninja Ultra 5.2" 4K HDMI Recording Monitor.

Q: 3. Does the Arco type plate fit onto the DJI RS2?

A: The Tiltaing Lightweight Camera Support Kit for Canon C70 (Black) (B&H# TITAT12AB) includes the Tilta Full Camera Cage for Canon C70 (Black) (B&H# TITAT12FCCB), and that cage comes with an Arca Swiss-compatible quick release plate that is designed to be screwed into the underside of the cage. In such a case, the cage could then be mounted in an Arca Swiss-compatible clamp. Now, the mounting plate that comes with the DJI RS 2 Gimbal Stabilizer (B&H# DJRONINS2) has an Arca Swiss-compatible quick release clamp. So, an Arca Swiss-compatible quick release plate attached to the underside of the Tilta cage can mount in that clamp. However, depending on your configuration, there may not be enough room for the camera to mount on the RS2 when its surrounded by the cage. In such a case, you'd need to use a longer Arca Swiss-compatible quick release plate, and possibly counterweights on the grip side (the right side from the camera operator's perspective) of the cage. But to answer your original question, yes, the Arca Swiss-compatible plate will fit into the quick release clamp of the mounting plate of the DJI RS 2 Gimbal Stabilizer (B&H# DJRONINS2).

Q: 4. Is the advanced kit compatible with the Manfrotto 502HD Pro Video head?

A: This will be compatible with virtually all professional video fluid heads with standard quick release plates.

Q: 5. Does this cage also fit the atamos ninja v+?

A: Yes, the Tilta Tiltaing Monitor Cage for Atomos Ninja V (Black) can fit the Atomos Ninja V+ 5.2" 8K HDMI H.265 Raw Recording Monitor.

Q: 6. Is there a top handle that is compatible with this handheld kit? (Canon C70)

A: The canon C70 comes with a top handle. If you feel compelled to purchase an alternative Top handle you consider the Tilta Quick Release Top Handle (Black) BH #TIAQRTHB • MFR #TA-QRTH-B

Q: 7. Will this work with the tilta RED Komodo Cage and the Metabones EF to RF T CINE Smart Adapter?

A: The Tiltaing Lens Support Type I (Black) will not work with the Tilta cage for the RED Komodo, as the mounting points are too wide for this adapter. The only lens support system ilta makes for the Komodo Cage is the Tilta PL Mount Lens Adapter Support for RED Komodo (Black), which is designed for PL mount adapters.

Q: 8. Is it possible to attach the leather strap that comes with the C70 to this cage? The question provided to a similar previous question was not clear in this regard. Thanks.

A: Yes. The following unit offers loop straps.

Q: 9. Will this cage work if you have the "Atomos Connect" module fitted to the back of your Ninja V?

A: No, unfortunately, the Tilta Tiltaing Monitor Cage for Atomos Ninja V (Black) does not have the clearance to work with the attached Atomos Connect module installed.

Q: 10. Does this cage also work for the Atomos Shinobi 5"?

A: No. Designed and made for the Atomos Ninja V.