The Battery Slide Pro V-Mount for Sony FX9 from Wooden Camera attaches to the rear of the camera and supports a V-mount battery while leaving access to the camera's standard battery compartment. With the camera's BP-U35 battery in place, hot swapping is supported.

The Battery Slide Pro also features three D-Tap ports for powering accessories. Additionally, it uses a digital fuse that monitors the D-Tap ports and disables them if they exceed the set current for accessories while leaving the camera running. Once the load has been reduced by removing accessories or otherwise, a reset button can be pressed to enable accessory power again.

The Battery Slide Pro attaches to the back of the camera via a top plate, using screws that come installed in the plate. (It attaches where the optional Sony XDCA-FX9 Extension Unit would normally attach.) It connects to the camera using an integrated barrel connector cable.

Once the Battery Slide Pro is attached, the battery plate position can be adjusted by loosening a lever and sliding the plate. The Battery Slide Pro closely matches the rear profile of the camera to allow it to efficiently fit in a camera case.

Attaches to the Rear of the Camera    Supports V-Mount Battery    Access to BP-U Battery Allows Hot Swaps    3 D-Tap Ports & Protective Digital Fuse

Related Questions and Answers

Q: 1. Does it come with the cable to plug to the camera?

A: Yes, the cable is included.

Q: 2. Can the slide assembly be lowered on the bracket that attaches to the camera? In other words, can the battery mount be lowered?

A: The battery plate portion of the Anton/Bauer Micro Battery Slide Pro for Sony FX6 (V-Mount) can be adjusted vertically along the camera connection arm using the large tightening knob, which when released will be able to slide along the light of the plate in it's open rail. This is best shown in the final two images where you can see the open rail that the screw would slide along just below the knob itself.

Q: 3. Can you use this with normal size gold mount (for example a Titon 98W) and is there any downside?

A: Yes, you can use the Wooden Camera Micro Battery Slide with normal size Gold mount batteries. There are no downsides.

Q: 4. Would this work with the BS1H full frame version of the camera? Or are they different power requirements? Thanks.

A: Yes, the Wooden Camera Micro Battery Slide Pro for Panasonic BGH1 will also support the full frame BS1H Cinema camera as well.

Q: 5. Will this also work with FX9?

A: No, the Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount) does not have the appropriate mounting for the Sony PXW-FX9 XDCAM 6K Full-Frame Camera System (Body Only). The Wooden Camera Battery Slide Pro V-Mount for Sony FX9 is an appropriate plate. See the link below: https://bhpho.to/2DHqzEt

Q: 6. Does not seem compatible with Anton Bauer’s own Titon SL V90 Gold Mount battery (i.e., one of the lightest V-mount batteries I could find). This is baffling to me. Am I missing something???

A: V-mount and gold-mount are separate systems. Get the SL V90 v-mount rather than the gold-mount. https://www.bhphotovideo.com/c/product/1593602-REG/anton_bauer_8675_0116_titon_sl_90_95wh.html

Q: 7. Will this work for the Canon C400?

A: Yes, the Wooden Camera Battery Slide for the C300 Mark III and C500 Mark II (Gold Mount) will work with and support the Canon C400.

Q: 8. Will this work (compatible) on the new Canon C400?

A: Since the Canon C400 is a newly announced product, we do not currently have compatibility information with the Wooden Camera Battery Slide for C300 Mark III and C500 Mark II (V-Mount). The 4 Pin XLR power cable would be compatible, but the mounts to the camera may not be the same distance for proper compatibility.

Q: 9. Can this be used to power other cameras such as c300 mk iii with the correct d-tap cable?

A: No, specific plate comes with the connects for the Blackmagic Pocket Cinema Camera 6K Pro. If you want to use a gold mount plate for the Canon C300 mk iii you will need this: BH #WO282200

Q: 10. Is there a (technical) reason this wouldn't work with cameras other than a Pocket 6K Pro if you have the appropriate Dtap cable?

A: The Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 / 6K Pro, Gold Mount) comes with a Power cable that would only work with the cameras listed from Black Magic. However if you don't use the power cable is should work with any other camera model if you use the D-Tap connector that is located on most Gold mount Batteries. The Battery slider pro also has 2 D-Tap connectors on the mount. Please note you would need 15mm rods to mount it.