Big game, small game, varmint hunting, or target shooting—the ZEISS 4-16x50 Conquest V4 Riflescope can do it all. It balances a versatile magnification range with a wide field of view (29' at 100 yards), and its large 50mm objective lens admits plenty of light for a bright, sharp image, even in low-light conditions. Its ZMOAi-T30 reticle features three tapered posts and an illuminated red crosshair, with 1 MOA hashmarks for holdover and windage. Impact point correction adjusts at 1/4 MOA per click. The external elevation turret features ZEISS Ballistic Stop to ensure absolute and positive return to zero.

Premium ZEISS lenses, enhanced with T* anti-reflection multicoatings and LotuTec protective lens coating, deliver 90% to-the-eye light transmission for a high-contrast image. A left-side turret allows parallax correction from 10 yards to infinity. Built on a 30mm maintube, the Conquest V4 is nitrogen purged and sealed for fog and waterproof performance.

ZMOAi-T30 Reticle, Second Focal Plane    30mm Diameter Maintube    Locking External Turret/Ballistic Stop    1/4 MOA Impact Point Correction    80 MOA Elevation & 60 MOA Windage    Anodized Aluminum Housing    T* Light Multicoatings/LotuTec Coating    Nitrogen-Filled Water & Fogproof    Side Focus Parallax, 50 Yards-Infinity

• 4-16x magnification range
• Wide 50mm objective diameter produces bright images in low-light conditions
• High-definition glass improves resolution and contrast
• T* optical coatings increase brightness and reduce glare
• LotuTec hydrophobic coating makes droplets run off the lenses and allows wiping without traces
• Field of view: 28.5-7.1' at 100 yards

• Three tapered posts
• Red crosshair with 10 brightness levels
• 1 MOA hashmarks
• 30 MOA of holdover marks with windage dots to each side
  • 1/4 MOA impact point correction
  • 60 MOA windage and 80 MOA elevation range
  • Parallax-free from 10 yards to infinity
  • 8.5-3.1mm exit pupil
  • 3.5" eye relief
  • 30mm diameter maintube
  • Aluminum construction
  • External elevation turret with Ballistic Stop
  • Capped windage turret
  • Nitrogen-filled fogproof
  • Waterproof to 400 mbar

  Related Questions and Answers

  Q: 1. What are the internal dimensions?

  A: The interior is roughly 5x4.5x2.5 inches.

  Q: 2. is the part of the grip that you hold made of medal, plastic or a rubbery material like the camera itself?

  A: The grip part is made of rubber.

  Q: 3. Has anyone figured out a combo of USB-c cable and micro hdmi cable that can both fit when plugged in at the same time?

  A: Because of how close those connections are this is something that may require trial and error to find the proper solution for. You could try using a product like the CAMVATE C1732 Micro-HDMI Male to HDMI Female Adapter (6"), B&H # CAC1732, for the HDMI connection. This may help by pushing the official HDMI connection a bit off of the body. However you will need to test it out, or other products like it, to see how it works. https://bhpho.to/2K73BMe

  Q: 4. does the ZEISS Tripod Adapter for Conquest HD and Terra ED Binoculars work with Zeiss Victory T*fl 42 binoculars?

  A: The ZEISS Tripod Adapter for Conquest HD and Terra ED Binoculars BH #ZETEBTPA • MFR #528388-0000-000 will work with all Conquest HD binoculars

  Q: 5. Can a Manfrotto quick release plate be used with this grip?

  A: A Manfrotto quick release plate can be attached to the bottom of this grip.

  Q: 6. Will this bag fit a Canon 10x30 is II?

  A: The interior dimensions of the ZEISS Cordura Case for Conquest HD 42mm and Terra ED 42mm Binoculars are about 7x5x3 inches so the Canon 10x30IS II binoculars should this case.

  Q: 7. Are you providing the Fujifilm original warranty or reseller warranty?

  A: This would come with a 1 year manufacturers warranty

  Q: 8. Can the battery door be opened with this plate on (x-t30)? Thank you.

  A: Yes the screw mount is offset to allow for the battery door to open.

  Q: 9. Does it fit the Zeiss 10x42 Victory T* FL? - is it the same cordura case that came in with those binoculars when new?

  A: So I compared the sizes of the two Binoculars. The Victory Pair that you have are 6.8 x 4.9", and the Conquest Models are 6.5 x 4.7". So I believe this case would work with the Pair that you have. You might just have to screw the eyecup's down with the covers on top. However this case should work.

  Q: 10. What is the supplied ring for?

  A: The "ring" that is included in the kit, is used to extend the connection, if the lens that is connected to the eyepiece is not able to focus properly..