This in-vehicle Tele-Pole with 8" and 9" Poles and Double Ball 75 x 75mm VESA Mount from RAM MOUNTS features a RAM Tele-Pole 9" base, RAM Tele-Pole 8" upper pole with flange, 6" swing arm, and a long C-size double socket arm. Easily connect your GDS Keyboard to the swing arm, and attach the GDS View monitor (both sold separately) to the flange and double socket arm via the included ball bases. With the ability to swing the keyboard out of the way when not in use as well as position the monitor at nearly any angle, you'll ensure your mobile workstation provides the versatility you need while in a vehicle.

Compatible with GDS Keyboard    Compatible with GDS View Monitor

Related Questions and Answers

Q: 1. What is the maximum and minimum diameter pole that this can take?

A: Any pole 1 to 2" in diameter is supported.

Q: 2. Is this compatible with a Rode NT3, which is 32mm dia. and .82 lb.?

A: Yes. It's compatible.

Q: 3. I am hoping to use this to mount a microphone to a SmallRig cage. Is there a tap for this that is 3/8" on both ends, so that I can screw it into the 3/8" thread holes on the cage?

A: The Rycote Universal Shotgun Mount for Cameras and Boom Poles has a 1/4" female thread on the bottom and the included shoe mount adapter has a 1/4" male thread on one side and a 3/8" female thread of the bottom of the shoe. To attach the shock mount to a 3/8" female thread on your SmallRig cage, you can either use a dual male thread adapter like the Impact 3/8"-16 and 1/4"-20 Adapter Spigot (B&H # IMCA112) with the native thread on the shock mount or you can use the Impact 3/8" to 3/8" Adapter Spigot (B&H # IMCA115) to use the female thread on the shoe mount adapter.

Q: 4. Can I interchange the mount to a PL mount using the PL mount adapter from DZO?

A: The DZOFilm VESPID 75mm T2.1 Lens (EF Mount) (B&H# DZ75VEF) has an interchangeable mount (between EF and PL using DZO's mounts) and may also be used with other mounts when using DZO's Octopus adapters.

Q: 5. When mounted to a boom pole, is it possible to adjust the angle of the microphone/pivot the shock mount?

A: Dear Isaac, I have purchased this product earlier this Autumn and I like it very much. I use it on my DSLR Camera rig when shooting video. The unit does pitch up an down adjusting the angle. I can also pivot the mount to rotate when mounted the cold shoe mount on my rig. I am very happy with my purchase. Hope this helps your decision. Best Regards, Rebecca

Q: 6. any way to use this with MT055XPRO3 and the 502HD?

A: No, this is a half ball mount used to mount a flat based head onto a tripod that has a 75mm bowl. The MT055XPRO3 has a center column with a flat top, so as long as you have the flat base version of the 502HD (MVH502AH) then you don't need any additional accessories to attach them.

Q: 7. Will this fit to RC - 8860?

A: The Robus 75mm Half Ball Leveling Adapter is designed for Robus Vantage Series 3 and 5 tripods. The Robus RC-8860 Vantage Series 5 Carbon Fiber Tripod is a Series 5 tripod.

Q: 8. Can I mount this on two heavy-duty light stands instead of C-stands?

A: You can mount the Glide Gear OH 75 Overhead Portable Pole Rig to any stand that has a 5/8" baby pin.

Q: 9. what is the length of the short handle ?

A: The manufacturer does not publish this spec, but the handle is just under 5" -- or 12cm.

Q: 10. What is the adjustment range, in degrees?

A: The Manfrotto 75mm Half-Ball is meant for leveling, so it will give a moderate range of movement close to 30 degrees.