The tan Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 2.5mm locking Connector for Comtek Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 2.5mm locking connector for direct connection to Comtek M-216 and M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What is the main difference between the series 4 compared to the 3?

A: I have no information on the Series 3 from which to compare. Sorry!

Q: 2. I have a Manfrotto 681B model with the accessory collapsible feet. The monopod has a wobble in use that is difficult to manage, especially hands off. Does this Benro A48FD provide good stability in use when hands off with a camera attached?

A: Brian, I have found that the A48FD provides adequately stable when hands off with a camera attached. You just have to twist the red locking mechanism to make the monopod stable. Once you do that it is rock solid. Of course, you have to make sure that the camera you are attaching to it is appropriate for this mono-pod. If its a DSLR, you should be fine. One issue I encountered with the mono-pod was that one of the feet does not stay retracted when I fold it. I have found that it is a craftsmanship issue (there is nothing I can adjust to fix the issue) Hope this helps.

Q: 3. I am not certain which monopod to buy. I have been looking at the Sirui P-204S Aluminum Photo/Video Monopod. The cost between this one (Surui) and the Benro is significant. Is there any real difference? I think the Surui is a bit more stable- legs are longer and wider. I would be using with a Nikon D90, 7000 with and without a 80-200 zoom plus a battery drive ( with and without). Any thoughts?

A: The Benro monopod can withhold a significantly larger load capacity (39.7 pounds), has a shorter folding length, flip locks, and is more lightweight.

Q: 4. Hello, I have been asked to take pictures of the football team (just group images). Will I be able to use it with my Nikon D5000?

A: yes its a very strong and stable unit. i love the extender releases,other than the screw type. great for the price.

Q: 5. One of the reviews said it does not fit his Sigma 600 lens ring. Others comments said take that mount out and flip it to reveal the 1/4inch mount. Will that fit a Sigma 600 lens mount?Is this true?

A: This comes with Reversible Camera Mounting Screw 1/4"-20 Male, 3/8"-16 Male , for sure it will fit sigma 600mm

Q: 6. will this hold Nikon D750 and can you use different heads?

A: Yes, it will support your D750 and you can attach many heads to this monopod.

Q: 7. Is this monopod compatible with the manfrotto 701 fluid head?

A: The monopod will fit the 701 fluid head fine.

Q: 8. Do I need to buy a separate top to be able to tilt and pan?

A: Yes you do. Manfrotto makes some inexpensive heads that work well.

Q: 9. Is it possible to just use the feets as a small tripod? i.e. does the tripod part have it's own screew?

A: You could, but only with a small point and shoot camera, or go pro, and or light body and lens, and no wind. It is steady but if you put a top heavy weight on top, it will fall over.

Q: 10. Has anyone used this with a gimbal? A Zhiyun Crane 2 for example. Can it handle it?

A: This monopod can accept a gimbal at the top.