The black Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 2.5mm locking Connector for Comtek Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 2.5mm locking connector for direct connection to Comtek M-216 and M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this include a carrying case?

A: The A38FD does not include a carrying case.

Q: 2. There are two versions of this monopod. The one above, another which screws down. Does anyone which one is easier and most reliable?

A: Both are dependable . The difference is that the A38FD is faster raise or lower the camera and the A38TD is slower.

Q: 3. Is this sturdy enough for a 30 sec long exposure. I’m looking at the Benro monopod $89.

A: The three-legged base on the bottom of the Benro A48FD Series 4 Aluminum Monopod with 3-Leg Locking Base, B&H # BEA48FD, is not designed to support the camera without assistance as is a tripod. It is designed for assistance in allowing you smooth panning and tilting motion while holding and manually moving the monopod. Due to its low support point, I would not leave the camera unattended mounted on the monopod, and as the base is low to the ground with the camera being high on the monopod, the image can still be affected by wind or platform movement. If you are shooting mildly long exposures, such as from 1/30 sec down to maybe 2-4 seconds (depending on how steady you are and if your camera/lens combination has image stabilization), the monopod may work for your usage needs, but for long exposures such as the 30 second exposure you list above, I would recommend a standard tripod for your usage needs.

Q: 4. Hi mate,Im confused about this acratech clamp item and with the other similiar item. Do you think this item will fit with my manfrotto 054 magnesium ballhead and also with sirui k40x? What's the difference with acratech quick release locking level clamp?ThanksKevin M

A: The Acratech Arca-Type Locking Lever Clamp for GV2 will not work on the Manfrotto 054 ball head, since this head uses the Q2 quick release system. However, this clamp will work on the Sirui K40X ball head, as this head is Arca-type. The difference between these two is that the Manfrotto head uses a proprietary Manfrotto QR system, whereas Sirui uses an Arca-type QR system, which is more or less a universal quick release system.

Q: 5. Can this monopod stand without holding it?

A: No, the Benro A48FD Series 4 Aluminum Monopod with 3-Leg Locking Base is not designed to support the camera without assistance. It will stand on its own with nothing on it.

Q: 6. Do you think this head is enough to work with the Sony Alpha a7R IV and 200-600 set or is it better to use the Pro head?

A: While the combined weight of the A7RIV and 200-600 lens are within the weight limit of the FlexShooter Mini, the torque applied when the lens is fully extended might overpower the ballhead's grip/friction force. I'd recommend the FlexShooter Pro for larger lenses, if only just to be safe. https://bhpho.to/3mBAOz8

Q: 7. Is the FlexShooter Mini suitable to use with a travel tripod such as the Gitzo Traveler GT1545T Series 1?

A: Yes, the FlexShooter Mini Ball Head with Arca-Type Locking Knob Receiver is compatible with the Gitzo Traveler GT1545T tripod.

Q: 8. Will this work on the Acratech Panoramic Head?

A: Technically the clamp can be used on the Acratech Panoramic Head. But it is not user replaceable and one needs to send both the clamp and the head to Achratech to have it changed out.

Q: 9. Wondering how the mini would perform with a spotting scope?

A: This head would be fine when using it with a spotting scope and an appropriate plate.

Q: 10. Why must this only be installed by Acratech? If I buy the Acratech Ultimate Ballhead, won't it just screw on the head?

A: We use Loctite on the threads to keep the clamp from unscrewing or twisting. This is a safer, solid and secure setup.