The black Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Connector for Comtek Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this remote start and stop video recording?

A: The ShutterBoss will mimic your camera's shutter release button. If your camera allows for the start/stop video recording function to be triggered by the camera's shutter button, then the ShutterBoss will be able to start/stop video recording as well. If the start/stop video recording function is controlled by a separate button on the camera, the ShutterBoss will not be able to trigger video recording.

Q: 2. Will this control auto-focus?

A: The shutter button on the ShutterBoss II Timer Remote Switch for Canon with 3-Pin Connection will control autofocus the same as the actuator on the camera. If you push half way it engages autofocus and if you push all the way down you engage the shutter and take a still. When starting a time-lapse interval, the ShutterBoss will control the autofocus for the first shot, but will NOT for the consecutive shots.

Q: 3. Can i use this with Rode NTG ?

A: Yes, the Rode Boompole for Rode NTG1, NTG2 and Video Mic (10') is a great pairing for use with Rode's NTG line of shotgun microphones along with an appropriate shock mount that matches the form factor of the specific mic and mounts to the pole.

Q: 4. Is this compatible with Panasonic G85 camera?

A: Unfortunately this will not fit the Panasonic G85

Q: 5. Will this work with MKE600? I am a bit skeptical despite the 3/8 cause description is so specific to Rode NT series.

A: The Rode Boompole features a standard 3/8 male threading compatible with any mount that features a 3/8 threading. This pole is in no way specific to Rode mics.

Q: 6. Would this device work with Fujifilm X-E2, X-T1 and X-T2? I appreciate all answers. Thank you.

A: I bought this to work with Canon 5D Mark lll and it works perfectly. There is no indication about any restriction in the owner's instructions......

Q: 7. Is this item (BH #VERCF1II) compatible with the micro-USB port on the Leica Q?

A: No, that is not compatible with the Leica Q. The only remote that seems to be compatible is by using a smart device and the free From the App for Mac or Android.

Q: 8. Can I use it with a remote shutter release cable connected to the camera (Canon 6D) without the transmitter ?

A: Yes. The receiver does not use the hot shoe, it can just sit there for stability. The receiver actually works through a cable to the side of the camera, which can be plugged into either the receiver, or the main transmitter.

Q: 9. Is this remote compatible with the Nikon CoolPix P510?

A: Unfortunately, this remote control is not compatible with the Nikon Coolpix P510 nor is there a model offered for it.

Q: 10. What's the interior length of this case, or maximum length boom pole it can fit? Only exterior length is listed.

A: Although interior dimensions for the RODE Boompole Bag for Boompole, Shotgun Mic, Softie and Shock Mount have not been provided by the manufacturer, it is made of soft neoprene material and the interior length will be very close to the exterior length of 39".