The tan Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and LEMO 3-pin Connector for Zaxcom Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a LEMO 3-pin connector for direct connection to Zaxcom TRX900AA, TRX900LA, TRX900LT, TRX900LTH, TRX900LTHS, TRX900LTS, TRXFB3, TRXLA2, TRXLA3, TRXLT3, and ZMT3 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Zaxcom Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can this fit the GODOX MS300 model?

A: Yes, the Godox RFT Standard 7" Umbrella Reflector for Bowens Mount Strobes and LED Monolights has a standard Bowens mount.

Q: 2. What's the interior length of this case, or maximum length boom pole it can fit? Only exterior length is listed.

A: Although interior dimensions for the RODE Boompole Bag for Boompole, Shotgun Mic, Softie and Shock Mount have not been provided by the manufacturer, it is made of soft neoprene material and the interior length will be very close to the exterior length of 39".

Q: 3. Will this reflector fit the Godox AD600 PRO? I want to use it to attach the 7" grid

A: While this reflector does fit an AD600 Pro, it does not accept grids. A more suitable reflector with an inner lip for 7" grids is the Studio Essentials Standard 7" Reflector, B&H # STMR7. https://bhpho.to/2H4zCBn

Q: 4. I just bought an NTG-3 and I already own this pole. Shouldn't I be able to use it with the SM4 mount (with the 3/8 insert) and the Rode NTG-3? Seems odd that only the NTG-2 and NTG1 are mentioned.

A: The Rode NTG-3 is compatible the SM4 mount as well, and will attach to this pole using the thread adapter.

Q: 5. Will this fit a Profoto B10?

A: This Godox Standard Reflector is not compatible with Profoto flashes like the B10.

Q: 6. Would this work on the first gen Aputure 300D?

A: Yes.

Q: 7. Hi ThereI shoot with Sony PMW EX3 and need to replace my tripod and dolly. I was planning to buy Libec LX7 M tripod and wondering which dolly is a better investment; DL2 or DL3. Thanks

A: The DL-3B is the more robust, sturdier, and offers the better, smoother wheels of the two dollies. It is a wiser, long-term investment and a more compatible companion to the Libec LX-7M tripod system.

Q: 8. Will this fit the SK400II-V Studio Flash Monolight?

A: Yes, the Godox SK400II-V is based on a 3 pin Bowens mount system.

Q: 9. Is it good for speed light?

A: Not my first choice for a speed light ,you would need Godox b&h# gos2 9https://www.bhphotovideo.com/c/product/1513261-REG/godox_s2_bracket_with_bowens.html) thier are better options out it depends what you want the light to look like.

Q: 10. Will this fit the Godox AD400? I would like to use it along with a umbrella I have

A: The reflector will work on an AD400Pro, but the umbrella shaft will not line up.