The black Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm locking Connector for Sony Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Would the 10 pin work with my Nikon D810?

A: Yes, this would work with the Nikon D810

Q: 2. Could I use this for the solar eclipse where I'd want a shot every few seconds over a period of 3 hrs?

A: You would be able to use this for the solar eclipse where you can take shots every few seconds over a period of 3 hours

Q: 3. Will this work with Black magic pocket cam?

A: This is not compatible with the Black Magic Pocket Camera.

Q: 4. Is it compatible with and supplied with cable for A99V?

A: I have Sony Alpha 7 11 and it worked very well with it. The web site for Vello products informs you about what cameras it will work. If you still have doubt, the customer service at Vello products was extremely helpful. I had similar questions and concerns before I bought the SutterBoss 11 for my camera.

Q: 5. Will this remote work with a Fuji-film XT-1 if you use the vello RCC F1-2.5 cable (B&H # VERCCF12.5 MFR # RCC-F1-2.5)? Part two - is the RCC F1-2.5 cable compatible with this Vello shutter boss ll remote? Thank you

A: Yes, if you use cable B&H # VERCCF12.5, you can use this remote with the Fuji XT-1.

Q: 6. How is the Shutter Boss II different than the original version?

A: The main difference is it can be set up to shoot 1-999 shots and version 1 is 1-99.

Q: 7. Does it work on Sony A7 III ?

A: Yes this will work on your Sony A7III.

Q: 8. Does it work without battery if I use the cord?Thanks :)

A: Yes it works as a shutter release without the battery and you are able to lock the shutter open by sliding the shutter button up on the remote. The intervalometer will not work unless you have the batteries installed.

Q: 9. Will it enable my D610 to take a 5-shot bracket?

A: I do not think the unit supports bracketing. Wish it would. I have a D610 also and was very surprised to find that they limited bracketing to 3 exposures.

Q: 10. Anyone know where I can get a PDF of the manual for the RC-C2II ? for canon.

A: Under the Overview tab, there is a link that says Guides & Manuals which you can click to view an instruction manual for the Shutterboss Version II Timer Remote Switch for Canon with 3-Pin Connection.