The black B2D Directional Lavalier Mic, Low Gain, with Hardwired 4-Pin Hirose Connector Cable for Audio Technica Wireless Transmitters from Countryman features a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers the lowest gain for powerful vocals such as in opera, which requires a higher overload level. In addition, the B2D lavalier is equipped with a hardwired cable that terminates to a 4-pin Hirose connector for direct connection to Audio Technica AEW-T1000, AEW-T1000a, ATW-T1001, ATW-T35m, ATW-T601, ATW-T701, ATW-T75, and ESW-T211 wireless bodypack transmitters.

Hypercardioid Pattern    Fits Audio Technica Transmitters    Headroom for Operatic Vocals    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Low (blue band, -20 dB re W4) for operatic vocals

Related Questions and Answers

Q: 1. How can this mic be connected to an iPhone with Lightning connector?

A: Since the Tascam TM-10L has a 3.5mm TRS locking connector, it will not connect securely to a non-locking 3.5mm TRS female connector on a standard Lightning adapter. As another option, you could use an XLR adapter like the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) which has a threaded 3.5mm TRS female connector and a built-in phantom power converter. The mic and XLR adapter can be connected to a mobile interface with an XLR mic input that is capable of supplying phantom power. An interface like the IK Multimedia iRig Pre HD Audio Interface with Mic Pre (B&H # IKIRIGPREHD) or the Saramonic SmartRig Di, Single-Channel Mic and Guitar Interface with Lightning Connector for iOS Devices (B&H # SASMARTRIGDI) would do the job. It would be much easier to just use a different microphone that is designed for use with an iPhone such as the Saramonic LavMicro DI Broadcast Lavalier Microphone with Lightning Connector (B&H # SALAVMICRODI), the Saramonic LavMicro U1A Omnidirectional Lavalier Microphone with Lightning Connector for iOS Devices - 6.5' Cable (B&H # SALAVMICRU1A), the Comica Audio SIG.LAV V05 MI Omnidirectional Lavalier Microphone with Gain and Monitoring for iOS Devices - Lightning (B&H # COSIGLAVV05M), or the Vidpro XM-LT Omnidirectional Lavalier Microphone with Lightning Connector (B&H # VIXMLT). These are only a few of the Lightning-equipped microphones that are available.

Q: 2. What is the bluetooth range from the recorder?

A: The BlueTooth range is +/- 30 feet.

Q: 3. Will this work with the Sony UWP-D21 Camera-Mount Wireless?

A: This mic is not wired correctly for a Sony wireless system. Here is a Sony compatible alternative, B&H # SEOLM2S.

Q: 4. Hi, Ive small question is the audio recorded mix or split?

A: Based on the manual, when using two transmitters the audio should be split left and right.

Q: 5. Are there any adapters that can be used to make this work with an Olympus WS-852 recorder?

A: Unfortunately not. The Olympus WS-852 has one 3.5mm mic input. Due to the locking collar on the lav's connector it is very unlikely that it will make contact as the recorder would need to have the same connector.

Q: 6. Will it work with the Rode Newsshooter wireless kit?

A: The Tascam TM-10LW - Lavalier Microphone will work as a mic for the Rode RODELink Newsshooter Kit Digital Camera-Mount Wireless Plug-On Microphone System with No Mic (2.4 GHz), B&H # RONSH.

Q: 7. Would this work with an Olympus WS-852 recorder? If not, is there an adapter that would work? And if not, is there another white lav mic you could recommend?

A: Lin K,The TM-10LW is designed to work with units that utilize stereo 1/8 microphone inputs and Sennheiser style screw lock connectors. Contact Olympus and ask them directly if this is what that particular model uses. Full details on the microphone that they might need are available here: a href= http://www.tascam.com/product/tm-10lw/ target= _blank http://www.tascam.com/product/tm-10lw//aThank you for your interest in TASCAM products

Q: 8. What is the SPL of the mics?

A: Unfortunately that spec is not specified from the Sony.

Q: 9. Does it have line input so I can plug into dj board without thw signal being too hot?

A: Yes, the Sony PCM-A10 High-Resolution Audio Recorder features one 1/8" / 3.5 mm TRS Line/Mic Input.

Q: 10. Will receiver compatible with iPhone 6S Plus?

A: Yes, the receiver included with the Comica Audio BoomX-D MI2 is compatible fro use with iPhone 6S Plus.