See far and wide with the Q6075-E 2MP Outdoor PTZ Network Dome Camera from Axis Communications. Equipped with a 2MP CMOS sensor and a 4.25-170mm varifocal lens, the camera captures video at resolutions up to 1920 x 1080 at 60 fps in a 65.1 to 2.0° field of view. The camera delivers color video in lighting conditions as low as 0.1 lux and uses an automatic IR cut filter to switch from color to B&W for day/night operation.

This camera has PTZ functionality, with 360° endless pan, 220° tilt, and 40x optical zoom. A built-in SD card slot allows onboard storage of footage while PoE technology simplifies installation, enabling you to run a single cable for power and data. Designed for use in vandal-prone outdoor locations, the camera is housed in an IP67- and IK10-rated enclosure. ONVIF compliance ensures compatibility with a wide range of surveillance equipment.

1920 x 1080 Resolution at up to 60 fps    Automatic IR Cut Filter    4.25-170mm 40x Zoom Lens, f/1.6-4.95    65.1 to 2.0° Field of View    360° Endless Pan & 220° Tilt    SD Card Slot for Edge Storage    RJ45 Ethernet with PoE    ONVIF Compliant, Profiles G, S & T    IP67 Rated for Outdoor Use    IK10-Rated Vandal Resistance

Automatically removable IR cut filter for day/night functionality

PoE technology

H.265, H.264, and MJPEG compression for efficient bandwidth and storage use

Axis Zipstream technology

Controllable frame rate and bandwidth (VBR/ABR/MBR H.264/H.265)

Lightfinder 2.0 technology

Built-in installation aids include pixel counter and leveling guide

360° endless pan and 220° tilt

40x optical zoom

12x digital zoom

480x total zoom

Image settings include manual shutter time, compression, color, brightness, sharpness, white balance, exposure control, exposure zones, fine tuning of low-light behavior, rotation (0 or 180°), text & image overlay, polygon privacy masks, image freeze on PTZ, automatic defog, backlight compensation, scene profiles, and highlight compensation

Up to 120 dB wide dynamic range

Analytics include video motion detection, motion guard, fence guard, loitering guard, autotracking, active gatekeeper, object removed, enter/exit detection, and object counter

Supports Camera Application Platform, enabling installation of third-party analytic applications

Security features include password protection, IP address filtering, HTTPS encryption,

IEEE 802.1X network access control, digest authentication, user access log, centralized certificate management, brute force delay protection, signed firmware, secure boot, and protection of cryptographic keys with included FIPS 140-2 certified TPM 2.0 module

PVC free

Rugged aluminum casing

IP67 and NEMA 4X rated for outdoor use

IK10-rated vandal resistance

Suitable for surveillance of cities, highways, and industrial facilities

Related Questions and Answers

Q: 1. What does the macro do on the lens?

A: macro is for focusing on subjects that are very close to the lens.

Q: 2. Can I use this lens on a black magic URSA Mini Pro 4.6k G2?

A: You can use 2/3" B4 lenses on the Ursa Mini Pro G2, you will just need the Blackmagic Design URSA Mini Pro B4 Mount, B&H # BLUMPB4M. https://bhpho.to/2GXa2Pa

Q: 3. can this be controlled with the blackmagic Focus Demand when on an Ursa Broadcast G2 camera?

A: Unfortunately no, the Focus Demand works with Fujinon lenses with the RD suffix in the lens name. Lenses that do not have servo focus built-in will not work with the Focus Demand. However, the LA16x8BRM lens is supported for full Zoom/Focus control from Blackmagic.

Q: 4. Does this lens have a Fujinon 12 pin or 8 pin port for focus control?

A: This has an 8 pin connect for the Servo Zoom control. For focus control you need a module like the one that is included with the Fujinon MS-01 Rear Zoom and Focus Lens Control Kit for ENG/EFP Lenses, BH #FUMS01. https://bhpho.to/2Ng1p3g

Q: 5. Will these work on older (SD) ENG cameras, like the panasonic sdx900?

A: Yes, 100 as the Panasonic sdx900 is based on a 2/3 system.

Q: 6. Is it any good in 4k? On a blackmagic ursa mini 4.6g2. Can the 2x extender be activated from the remote?

A: The resolution of a lens is determined by the camera not the lenses. The 2x extender is accessible through a switch that is located on the module near the rear element.

Q: 7. could this be used on the Sony FX9 after version 3 firmware is released?

A: Yes it is possible to use this lens with the FX9 If you purchase an adapter. Please note that this lens is not designed to cover the Full Frame sensor inside the FX9 therefore it will not be possible to use this lens in Full Frame or even Super35 mode. The maximum resolution that you will get when using this lens is 1920x1080p.

Q: 8. What is the mfr or BH part number to replace the lens cap that I lost for this model?

A: The Fujinon XA20sx8.5BRM-K3 HD Professional Lens has a 82mm filter. Here is a 82mm cap Sensei 82mm Center Pinch Snap-On Lens Cap BH #SELC82 • MFR #LC-82. If you mean the hood cover, please contact Fujinon for the replacement part.

Q: 9. Will this lens work with a Panasonic AK-HC3900GSJ Camera, AK-HCU250PSJ CCU and MS-15D Full Servo System ?

A: The Fujinon XA20sx8.5BRM-K3 HD Professional Lens does not support the Fujinon MS-1D controls. Please use Fujinon MS-01 controls for this lens model. Fujinon MS-01 Rear Zoom and Focus Lens Control Kit BH #FUMS01

Q: 10. Does this lens pair with the canon c500 when using a 2/3 mount?

A: Yes, the Fujinon XA20sx8.5BERM-K3 ENG Lens will work perfectly with the following adapter. The B4 lens also has a 2x extender which is a requirement for the adapter. MTF Services Ltd B4 2/3" to Canon EF Adapter BH #MTB4CANEF Compatibility: Arri Alexa, Canon C300 PL, Canon C500 PL, PL mount, Red Epic PL, Red One PL, Red Scarlet PL, Sony F65