This 62mm Nano-X Combination ND + Circular Polarizer Filter from K&F Concept combines a solid neutral density filter with a circular polarizing filter into one, creating an essential tool for landscape photographers. This filter's 1.5 optical density provides a 5-stop exposure reduction of the entire image, allowing for a wider aperture or slower shutter speed without overexposing the image. Slowing the exposure time adds motion blur to convey movement or smooth images, while the wider aperture capability allows for finer depth of field control.

The filter simultaneously reduces reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface. Sunlight is naturally partially polarized due to reflecting off electrons in air molecules, causing the light to scatter into what appears as haze. A polarizing filter arranges and filters this directionally polarized light perpendicularly to the reflected light, allowing for the absorption of much of this light. This results in a noticeable reduction of glare and reflections from non-metallic surfaces and an increase in the saturation of skies and foliage.

1.5 Optical Density    Multicoated SCHOTT B270 Glass    Waterproof Construction    Darkens Entire Image, Reduces Haze    Helps Eliminate Reflections and Glare    Reduces Shutter Speeds, Widens Apertures    Greater Control over Exposure Settings

• SCHOTT B270 German optical glass
• Green multicoating
• Waterproof, scratch-resistant nano-coating

Related Questions and Answers

Q: 1. When using an iPhone as a on device monitor is there a way to charge it while using it?

A: Yes, you can use the USB-C 5V out port on the Accsoon CineView Nano Wireless Video Transmitter in order to charge a phone while using the transmitter.

Q: 2. Can it record and stream at the same time?

A: Yes, the Accsoon CineView Nano Wireless Video Transmitter, can record and stream at the same time.

Q: 3. Can I mount the Ikan PT1200 Teleprompter on top of it and a sony camcorder?

A: The KF Concept tripod would not work well with the Ikan Prompter. We suggest strong tripods like the following https://bhpho.to/3se04QN or the lower cost https://bhpho.to/3MQUYSh

Q: 4. I’d like to acquire a 10 stop ND filter that would fit my Nikon drop-in 40.5mm filter unit? I understand that it doesn’t allow for me to add the ND to the Polarizer.

A: The Nikon 40.5mm Drop-in Circular Polarizing Filter for Nikon AF-S NIKKOR 400mm f/2.8E FL ED VR Lens has a built in filter which can not be removed.

Q: 5. Is it possible to use multiple cineview nano units for wirless multi cam setup for streaming? If yes what apps/devices are compatible

A: Yes, the Accsoon CineView Nano Wireless Video Transmitter would need to transmit to multiple receivers all of which would need to be connected to a multi-cam switcher.

Q: 6. Will this hood allow using the original lens cap?

A: Yes, it will.

Q: 7. Hello! Does this work? Handle REC button to Nucleus N Motor to Komodo via RUN/STOP Cable?

A: Yes, you would be able to control the RED Komodo RUN/STOP with the Tilta Nucleus Nano II Control Handle via the Nucleus-N motor with a compatible R/S cable connected to the motor.

Q: 8. Is there a compatible receiver unit with an HDMI output that can be paired with this unit?

A: The Accsoon CineView Nano Wireless Video Transmitter does not have a compatible receiver unit as it is designed to be used with mobile devices only. A kit that includes a transmitter and receiver that would provide HDMI output would be the Accsoon CineView SE Multi-Spectrum Wireless Video Transmission System, BH #ACCVSE.

Q: 9. Can you lock the iPhone’s screen to be in the pocket and continue to record?

A: No, when using the Accsoon CineView Nano Wireless Video Transmitter to transmit to a smart device for recording via the smart device, should the smart device be locked or closed the recording will stop.

Q: 10. Can the NATO module on the side of the control handle be used to attach the handle to a camera cage with the appropriate adapter

A: Yes, the Tilta Nucleus Nano II Control Handle can be attached to NATO clamp adapters when using the NATO-mount side of the handle. Here's an example of such an adapter: the Niceyrig Quick Release NATO Clamp with 1/4"-20 Mounting Points (B&H # NI024).