The cocoa B2D Directional Lavalier Mic, Low Gain, with Hardwired LEMO 3-Pin Connector Cable for Lectrosonics and Sennheiser Wireless Transmitters from Countryman features a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers the lowest gain for powerful vocals such as in opera, which requires a higher overload level. In addition, the B2D lavalier is equipped with a hardwired cable that terminates to a LEMO 3-pin connector for direct connection to Lectrosonics and Sennheiser SSM and SK 2000 wireless bodypack transmitters.

Hypercardioid Pattern    Fits Lectrosonics and Sennheiser Transmitters    Headroom for Operatic Vocals    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Low (blue band, -20 dB re W4) for operatic vocals

Related Questions and Answers

Q: 1. How can I use the ENG set on a camcorder that only has XLR mic inputs?

A: The simplest way would be to use the Rode XLR Adapter Item# ROVXLRP It is very likely that your camera has a Mic/Line switch. Experiment with both settings to see which setting yields the best Audio Results.

Q: 2. I'm looking for a new stand adapter for this set up...(the device that is actually holding the microphone..suspended )Does anyone know where I can find it..? (as a replacement item since I already have the blimp system)

A: The Sennheiser MZS20-1 is the combination shock mount, pistol grip and stand adapter included with the Sennheiser blimp system 2; B&H# SEMZS201.

Q: 3. Is the effective range on this new mic farther than the MEK 600 ( 12') ?

A: The MKE-440 is a mini sized stereo mic unlike the MKE-600 which is a mono shotgun. As such it offers a wider and less directional pickup The MKE-440 is sized closer to the MKE-400.

Q: 4. My use case is I'm planning to have this as a boom and the talent may walk 2-3 feet around. (training - in front of a screen). The mic will be positioned overhead : How will the performance be impacted as a result? Is this still the mic for such a task?

A: This shotgun mic is highly directional, and any shift off axis from the front of the mic will result in a drop off in sound from the presenter. To use this mic, a boompole operator would need to follow the person with the mic as they move. If that is not an option, a lavalier mic on the presenter would be a better option to ensure that no matter where the presenter moves to, the audio is captured. Here's an example of a wired lav solution, B&H # SOECM77B.

Q: 5. Will a sennheiser mke 600 fit in this?

A: The MKE-600 would be compatible as well.

Q: 6. Is there a way to convert this 1/8 stereo plug to (2) XLR plugs to run into a Zoom f3?

A: BH #AL130 can be used to adapt the Sennheiser MKE 440's output to dual XLR.

Q: 7. How many of these stations would i need for a lecture hall of 100 seats? Can the same one be used for two lecture halls?

A: The Sennheiser MobileConnect Station for Assistive Listening System (B&H # SEMOBCONSTTN) can support up to 100 simultaneous clients.

Q: 8. I'm looking for a hard case to protect for student use. Any suggestions?

A: You could use a Pelican 1560 with foam set to protect the blimp: https://www.bhphotovideo.com/c/product/388343-REG/Pelican_1560_000_110_1560_Case_with_Foam.html

Q: 9. This could work with the mkh416?

A: The correct foam for the MKH-416 IS ITEM# SEMZW415

Q: 10. Is the Sennheiser MKE 440 Stereo Shotgun compatible with JVC's ProHD GY HMZ camcorder line?

A: Yes. This mic will connect to the stereo 3.5mm input of the camcorder.