The black Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm Connector for Comtek Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is it possible to use this with just one tripod supporting it, in the middle? (heavy duty tripod)

A: It may be possible to use this slider with just a single tripod. However with this slider being 38 long you will need a heavy duty solution like B&H #KETH1004, which is the Kessler Crane K-Pod Tripod System. The K-Pod has a load capacity up to 500 pounds and can handle a longer than normal slider.

Q: 2. Will this fit a Profoto B10?

A: This Godox Standard Reflector is not compatible with Profoto flashes like the B10.

Q: 3. I accidentally purchased the B60 hood and it is too large for my Hasselblad 150mm. It is old and was a Gift so I do not know if it is a "C" lens, it isn't marked? Can anyone tell me if this works? Is it smaller than the B60?

A: Yes it will fit

Q: 4. Hi ThereI shoot with Sony PMW EX3 and need to replace my tripod and dolly. I was planning to buy Libec LX7 M tripod and wondering which dolly is a better investment; DL2 or DL3. Thanks

A: The DL-3B is the more robust, sturdier, and offers the better, smoother wheels of the two dollies. It is a wiser, long-term investment and a more compatible companion to the Libec LX-7M tripod system.

Q: 5. Can this dolly be used with a Sarchtler Flowtech 75? I know it's not on the list, but the list may predate the Flowtech tripod...

A: This dolly can be used with the Sachtler Flowtech tripod.

Q: 6. Can this fit the GODOX MS300 model?

A: Yes, the Godox RFT Standard 7" Umbrella Reflector for Bowens Mount Strobes and LED Monolights has a standard Bowens mount.

Q: 7. Does this work in the silent mode and still maintain the silent shutter?

A: Sony states that yes, the Silent Shooting mode should work when using a remote release connected to the camera's Multi-Terminal port. Do note that the mode dial has to be set to P/A/S/M to use the Silent Shooting mode.

Q: 8. Is this cord compatible with the iPad Mini 3? I just got it in the other day and have been running tests on my mini 3. Can get audio to the headphones but cannot get the mic to work. Thought maybe I got a bad cable but now I am thinking maybe it is not compatible at all. :/

A: Andrew, I have to apologize as we have not yet tested with the iPad mini 3. We have tested with the vast majority of Apple products with great success. Most devices from apple are utilizing the same trrs pin-out and handle signals the same way.Its possible that we need to review the product with the iPad mini 3 and test further, its also possible that you received a cable that inst working properly- which is a very rare occurrence with our QC processes. Or another possibility is how garage band is handling the signal itself. Please make sure the cable itself is seated fully in the iPad, and please reach out to us to trouble shoot on the phone. We will not be able to test compatibility until we purchase receive and bench test in our R&D lab.you can reach us at 845.246.1915 or 800-543-0909 - Ask for Sescom Tech support, and or Dan. we can walk you through a few tests that may help us determine the failure point.

Q: 9. Will this fit the Godox AD400? I would like to use it along with a umbrella I have

A: The reflector will work on an AD400Pro, but the umbrella shaft will not line up.

Q: 10. Will this reflector fit the Godox AD600 PRO? I want to use it to attach the 7" grid

A: While this reflector does fit an AD600 Pro, it does not accept grids. A more suitable reflector with an inner lip for 7" grids is the Studio Essentials Standard 7" Reflector, B&H # STMR7. https://bhpho.to/2H4zCBn