The black Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm locking Connector for Happie Amp or Empower Sound Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Happie Amp or Empower Sound and Amazing Amp wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Happie Amp or Empower Sound Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with blue yeti black edition mic ?

A: This windscreen is recommended for specific Heil microphones, but it would fit on other large diaphragm mics, such as the Blue Yeti.

Q: 2. Can this fit the GODOX MS300 model?

A: Yes, the Godox RFT Standard 7" Umbrella Reflector for Bowens Mount Strobes and LED Monolights has a standard Bowens mount.

Q: 3. Can you record in 32-bit while interfacing with a computer, or is it limited to 24-bit?

A: Yes, the Sound Devices MixPre-6 II can be used to record 32-bit audio on the recorder while simultaneously using it as a USB audio interface to record audio on your computer.

Q: 4. The B&H article on these second-gen MixPres says, "you can power the MixPre II series recorders via AA or Sony L-mount batteries, USB bus power, or an external power source." How? The pictures don't show any DC power input or an L-mount... just the flimsy, unacceptable USB.

A: That is what they chose to use on the 2nd generation, the MX-PSU power supply with USB connector, or the MX-LMount sled.

Q: 5. WILL THIS FIT GODOX AD200?

A: If you use a adapter like this one https://bhpho.to/2EuSYhI it will.

Q: 6. Do I need to add a mixer to this? If I do add a mixer, what do I gain?

A: No, a separate mixer is not required for use with the Sound Devices MixPre-6 II 6-Channel / 8-Track Multitrack 32-Bit Field Recorder. Whether you might want to use a separate mixer depends on the requirements for a specific application. For example, you could use a separate mixer if you need additional input channels to connect more than four microphones, instruments, or line level audio sources to record simultaneously.

Q: 7. Is this recorder capable to solo and mute channels to the headphone out, while recording?

A: Hi Alejandro. Yes, both mute and solo are available while recording. Please note that mute will also mute it from the currently recording tracks.

Q: 8. How "Quiet" are the preamps behind the 3.5mm Aux input?

A: About as quiet as quiet can be.

Q: 9. Hi, can i use this on a C70? thanks

A: Yes, the Meike 0.71x Speedbooster Adapter will be compatible with a Canon C70.

Q: 10. I have a power bank with 2 usb-a ports, (1) 5V 2.1A and (1) QC 2.0: 5V 2A - 9V 2A - 12V 2A, in this case do I have to plug both USB-A’s ? Or this could damage my device ?

A: If you’re using the MX-USBY cable you should plug both USB-A ports (Data & Power) into the same destination to properly power the MixPre. MX-USBY: https://www.bhphotovideo.com/c/product/1333784-REG/sound_devices_mx_usby_y_cable_usb_c_to_2x.html We also recommend looking at our Powering Options page to get a list of powering methods that we have tested: https://www.sounddevices.com/mixpre-3-mixpre-6-powering-options/ Any powering method/battery bank not on that list means it has been tested and we cannot guarantee it will work as expected.