The tan B2D Directional Lavalier Mic, Low Gain, with Detachable cH-Style 4-Pin Connector Cable for Audio Technica Wireless Transmitters from Countryman features a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers the lowest gain for powerful vocals such as in opera, which requires a higher overload level. In addition, the B2D lavalier is equipped with a detachable cable that terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-T5201 wireless bodypack transmitters.

Hypercardioid Pattern    Fits Audio Technica Transmitters    Headroom for Operatic Vocals    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Low (blue band, -20 dB re W4) for operatic vocals

Related Questions and Answers

Q: 1. Will this fit the Manfrotto BeFree video head (to replace 501PL)?

A: Yes it should as the Befree Live Video uses this style of plate.

Q: 2. is it true this work with zyhiyun weebill 3s as shown in the video ? https://www.youtube.com/watch?v=RbyMqOSFeNw

A: Yes, the SmallRig Manfrotto-Style Quick Release Plate with Arca-Type Mount for DJI RS Gimbals will also work with Zhiyun's Weebill 3S as well.

Q: 3. It will fit arcs Swiss monoballfix fix plate?

A: The SmallRig Manfrotto-Style Quick Release Plate with Arca-Type Mount for DJI RS 2/RSC 2 should fit the Arca-Swiss C1 Cube GP Geared Tripod Head with MonoballFix plate without any problems.

Q: 4. Could this be used with the Smallrig Black Mamba Half cage for the R5C as a way to mount the cage onto a Manfrotto tripod with no additional plates or accesories in-between?

A: The bottom of the Smallrig Black Mamba Half cage has a Arca Swiss plate that directly slides into the DJI RS2/RS3 plate.

Q: 5. Is it compatible with Manfrotto 501 size baseplate to fit on Sachtler FBS8 fluid head?

A: No, the SmallRig Manfrotto-Style Quick Release Plate with Arca-Type Mount for DJI RS 2/RSC 2 is not compatible to fit on the Sachtler FBS8 FLuid Head.

Q: 6. Would this work with the Manfrotto 220 gimbal?

A: The manufacturer does not list the SmallRig Manfrotto-Style Quick Release Plate with Arca-Type Mount for DJI RS 2/RSC 2 as compatible with the Manfrotto Gimbal 220. We believe it is too long and the camera mounted on it would hit the rear motor.

Q: 7. Will the Peak design tripod plate for on this? The original RS2 plate fits in width but is too high. Since this one has a knob, it looks lower and I was wondering if it might be able to fit the capture clip?

A: Although the Peak Design tripod has an Arca-style plate, it will sit too low because the camera will interfere with the Quick-Release Plate's (Lower) locking lever. We recommend attaching a Quick Release Assembly with Quick Release Plate to your Peak Design Tripod and DJI Ronin RS2. https://www.bhphotovideo.com/c/search?q=quick%20release%20plate&filters=fct_category%3Aquick_release_clamps_38008

Q: 8. I want to use this to easily attach my peak design arca plate to the Benro s8 fluid head. Will that work?

A: No, the peak design ARCA SWISS plate to the Benro s8 fluid head does not work on the SmallRig Manfrotto-Style Quick Release Plate with Arca-Type Mount for DJI RS 2/RSC 2.

Q: 9. Would this camera work with an NVR?

A: Normally no the Sony Compact UHD 4K Box-Style POV Camera with Wide-Angle Lens (Black) would not connect to an NVR. It mostly depends on if the NVR has RTMP/RTSP channels for recording.

Q: 10. Can these be charged with the Frezzi FQC-NP1 Quick Charger for NP-1?

A: Yes, The Frezzi FQC-NP1 Quick Charger for NP-1 can be used with the IDX System Technology NP-9X which is an NP-1 style Li-Ion battery. Charger link - BH #FRFQCNP1 https://bhpho.to/3UHWQBw