The edelkrone Slide Module v3 is an add-on attachment for all SliderPLUS sliders. It adds motorized capability to the slider, allowing for motion control from a companion iOS/Android app. You can set up stable motorized slides or easily program motion time-lapse and stop motion videos. Also, when the Slide Module v3 is attached to the slider, it can be synced up to other edelkrone motion control devices (such as the HeadPLUS pan and tilt device) to allow for synchronized multi-axis motion control from the same app.

New features include improved wireless connection and a longer range, improved power management, a physical power button, an information screen that provides instant feedback, and quieter operation than ever before. The Slide Module v3 uses a quiet step motor driving technology that combines precise step motor positioning ability with ultraquiet operation.

While it does support app and optional IR remote control, the Slide Module v3 also allows you to manually adjust the positions and program the motions of your SliderPLUS (and optional HeadPLUS) by hand. This allows for a more efficient and intuitive workflow in many situations.

The Slide Module v3 can be operated by your choice of batteries or a power adapter, both options sold separately. For battery power, it requires optional Canon or Sony battery brackets and two LP-E6 or two L-series batteries. Or you can get the AC/DC Adapter for Slide Module. One of these options is required. With two LP-E6 batteries, the Slide Module v3 runs for approximately two hours and shoots about 12,000 photos in time-lapse mode.

Compatible devices include the HeadONE single, HeadONE dual, HeadPLUS, and HeadPLUS PRO. When the Slide Module v3 is synced with your SliderPLUS and HeadPLUS, you can perform automatic target tracking and live target switching. Add a Laser Module to the HeadPLUS, and you can teach the position of any stationary target to the system instantly by just aiming at the target and pressing OK. The camera will instantly frame and focus on the target. Used with the SliderPLUS and HeadPLUS or HeadONE, the Slide Module v3 also lets you achieve sequencing by setting up multiple poses to create comprehensive camera motion with adjustable speed and looping.

Motorized Add-On for SliderPLUS Models    SliderPLUS + HeadPLUS/HeadONE Multi-Sync    Quieter Operation than Previous Versions    New OLED Screen & Physical Power Button    Improved Wireless Connection & Range    Allows Motion Control from App or Remote    Can Be Programmed Manually by Hand    Macro-Precise Loopable Motion    Step Motor with High-Resolution Encoder    Runs on Optional Batteries or AC Adapter

• Improved wireless connection with a longer range

• Physical power button

• Improved power management (auto power off/save)

• Quieter than previous versions

• Information screen with instant feedback

• Add-on attachment for all SliderPLUS sliders (SliderPLUS v5, SliderPLUS PRO, SliderPLUS, SliderPLUS X, SliderPLUS M)

• Adds motorized capability, allowing for motion control from a companion iOS/Android app or an optional edelkrone Remote

• Can also be programmed manually by hand

• Syncs with the SliderPLUS and other edelkrone motorized devices for multi-axis motion control

• Backlash-free gear design

• Runs on optional batteries or power adapter

• Scans the available devices in its surroundings and pairs with them automatically, giving you a single screen to control all the devices together
• Set the pose of your camera, and press and hold on any of the keypose buttons to record that pose; use the same button to recall that pose, or press two keyposes to put the system in a loop between both keyposes
• Adjust the speed and acceleration of the transition between keyposes, or easily create time-lapse videos by using the same keyposes

Related Questions and Answers

Q: 1. The product info claim there's two brackets included, yet the product images show a third. Does this include the third bracket to use a single HeadOne in tilt mode? Thanks!

A: There are two brackets in this kit: An L bracket and a connector bracket.

Q: 2. Is there a bundle with Head Plus?

A: We do not have a bundle available with the Head Plus at this time.

Q: 3. which power supply do you need to buy to get it to run off of AC power?

A: To ensure that power is regulated you would use a power supply such as the Bescor PSA12421 AC Power Kit for Devices with 2.1mm Barrel Power - https://bhpho.to/35S5xA4

Q: 4. Can a sequence to be executed on the Jib or any Edelkrone motorized device be triggered by an external device or software?

A: At this time Edelkrone products can only be controlled by Edelkrone software or devices. You can control Edelkrone products from Android or IOS Tablets and Smartphones using the Edekrone app or you can control them using the Edelkrone Controller.

Q: 5. Is this compatible with Edelrkone HeadOne too?

A: Not that we are aware of. This product is compatible with the HeadPlus, B&H # EDHEADPLUS. Compatibility with the HeadOne is not listed.

Q: 6. Does the laser module + head plus work together with dollyone? (Like it does with the laser+head plus+slider.)

A: there is no mention of the laser module working with the edelkrone DollyONE from the manufacturer

Q: 7. How is this different from the Surface One?

A: The DollyONE is smaller and does not feature the Laser Pointer used for positioning.

Q: 8. What Gold Mount Battery and charger are Recommended for the Edelkrone DollyPlus Pro and the DollyPlus?

A: There are no specific Gold Mount batteries or chargers required.

Q: 9. Is there a DollyPlus Pro bundle with HeadPlus Pro and V-Mounts?

A: We do have B&H # ED82740B16VM which is a kit that has the DollyPlus Pro, HeadPlus Pro and V-Mount Battery Brackets.

Q: 10. Is this compatible with the Edelkrone SliderOne v2?

A: This requires a Head & Slide Module along with the Slider. If you are using the Head and Slide Module along with the SliderOne, it will work.