The cocoa Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and TA4F Connector for Shure Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a TA4F connector for direct connection to Shure AD1, ADX1, AXT100TA4F, GLXD1, PGXD1, QLXD1, and ULXD1 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Shure Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will it work with the Nikon Z7?

A: Yes this will work with the Z7.

Q: 2. I want to record a series of back-to-back bulb exposures with *very* little time between exposures -- essentially continuous shooting. Specifically... Can I set the Vello device to 20-sec exposures and 20-sec intervals? ...or must I add a between-shot time delay? (e.g., 19-sec exposures and 20-sec intervals).

A: You need to set the interval. And the fastest is one second.

Q: 3. Would this device work with Fujifilm X-E2, X-T1 and X-T2? I appreciate all answers. Thank you.

A: I have the wireless version for Nikon and I also bought the wired version for Canon for a friend. On the wireless version:The receiver and the remote control are the same for Nikon, Cannon, what have you. The difference is in the cable that connects the receiver to your camera. On the receiver end, there is a mini 2.5mm jack. On the camera end, there are of course a variety of connectors. Fujifilm XT1 and XT2 have 2.5mm sub-mini (2-Ring). So I would go with that 2.5mm sub-mini which is listed under Canon 2.5 sub-mini. On the wired version: the cable cannot be unplugged;

Q: 4. will this shoot in Bulb?

A: Yes...it does do Bulb Mode!

Q: 5. How many cables come with this kit? 3 types (2 nikon and 1 canon) as described in the specs?

A: Mine came with 4 cables:- 2 Canon (3 pin terminal, and 2.5 mm sub-mini jack)- 2 Nikon (10 pin terminal, and DC-2 terminal)

Q: 6. Will this work with Canon EOS RP?

A: No, you need the sub mini version, click the link below to view; https://bhpho.to/3aTzpPq

Q: 7. Is this remote compatible with the Nikon CoolPix P510?

A: Unfortunately, this remote control is not compatible with the Nikon Coolpix P510 nor is there a model offered for it.

Q: 8. Will this work with the Pentax 645Z?

A: The Vello unit that was shown on your request has a sub mini connector that will not work on the 645z, you would need one with a regular USB connector. After I bought one of the hard wired cello units myself, I decided it would be better to have a radio frequency trigger control (more convenient in many situations)... so I suggested a similar unit like the Satechi USB controller which I like.

Q: 9. Hi , is it compatible with Rx 100 M5 ??

A: Yes, the Vello Wireless ShutterBoss II Remote Switch with Digital Timer for Sony Multi-Terminal would be compatible for use with the Sony Cybershot DSC-RX100 V Digital Camera.

Q: 10. Does this work with the Canon EOS R6?

A: Yes it is compatible with the R6.