The cocoa Countryman E6X Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 4-pin Hirose Connector for Sony Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 4-pin Hirose connector for direct connection to Sony DWT-B01, DWT-G01, DWT-S01, and DWT-V01 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What is the difference between a timer remote controller and a timer remote switch?

A: In the most simple versions, there is NO difference between a 'timer' and 'switch'. However, variations such as wireless vs. wired do add functionality and complexity. The Vello is a fine alternative for the pricier major brand names (Nikob, Canon, etc)

Q: 2. Is this compatible with the canon 7d mark II?

A: The Vello ShutterBoss Version II Timer Remote Switch for Canon with 3-Pin Connection will be compatible with the 7D II, yes.

Q: 3. Does this work with EOS R5?

A: Hello! Yes it will!

Q: 4. Would the 10 pin work with my Nikon D810?

A: Yes, this would work with the Nikon D810

Q: 5. Will this work with Mirror Up (M-Up) mode? I want to use the Vello Shutterboss on my D610 for long exposures of several minutes. Before firing the shutter, I need to be able to raise the mirror and let the camera settle from shake. Is this possible with this remote?

A: When you use the shutterboss for the exposure timing then you have to use the camera shutter to raise the mirror (you are only bringing up the mirror so you can touch the camera) and then trip the timer on the shutterboss to make the long exposure. It works great. I hope this helps. Hal

Q: 6. The one I got does NOT work with Nikon D850. Anybody has the same experience?

A: Mine is acting up. It does not release the shutter but shoes the timer counting down. It has worked in the past so maybe it is a short in the wiring. I am ordering a replacement and hope this will resolve the issue.

Q: 7. Will this work with Black magic pocket cam?

A: This is not compatible with the Black Magic Pocket Camera.

Q: 8. Similar to the question above re: the Fuji XE2... Will this work with the Fuji XT1? Thanks!!

A: Yes, the Vello Shutterboss Version II will work with the Fujifilm XT-1.

Q: 9. Can I use this as a simple shutter release? I want the possibility of just taking one photo with a fast shutter speed..

A: Yes, you would be able to use this as a simple shutter release.

Q: 10. I want to record a series of back-to-back bulb exposures with *very* little time between exposures -- essentially continuous shooting. Specifically... Can I set the Vello device to 20-sec exposures and 20-sec intervals? ...or must I add a between-shot time delay? (e.g., 19-sec exposures and 20-sec intervals).

A: You need to set the interval. And the fastest is one second.