The 8Sinn 15mm Baseplate is ARRI dovetail compatible and supports optional camera-specific riser plates from 8Sinn. Available plates include the Riser Plate Basic, which supports the URSA Mini, C100, and Sony FX-9 cameras, and the Riser Plate I, which is for select 8Sinn Z CAM, a7/a7R, and Blackmagic Pocket 4K/6K cages. These optional plates set the supported cameras at the appropriate optical center on the 15mm Baseplate.

The 15mm Baseplate features 15mm LWS rod support via front and rear rod ports and a tightening lever on the left and right sides. The left side has a second lever, and this is for securing the compatible riser plate. The 15mm Baseplate offers two ARRI rosette mounts for attaching optional handgrips, and it also provides a section with multiple 1/4"-20 accessory mounting threads. The baseplate is made with excess weight cut out to provide a minimalist, lightweight design.

Supports URSA Mini, EOS C100, Sony FX-9    15mm LWS Rod Support    ARRI Rosettes    1/4"-20 and 3/8"-16 Tripod/Camera Mounts    1/4"-20 Accessory Threads

• Supports optional camera-specific riser plates from 8Sinn

• Compatible with the Riser Plate I and Riser Plate Basic

• ARRI dovetail compatible

• 15mm LWS rod support

• ARRI rosette mounts

• 1/4"-20 accessory mounting threads

Related Questions and Answers

Q: 1. How can you use this baseplate on an ARRI-Standard Dovetail?

A: No you cannot. It is designed for Tilta's dovetail standard.

Q: 2. Do the included 15mm rods have a female thread?

A: Yes it does, you can use the Zacuto 4.5" (11.43 cm) Male/ Female Rod Extension (Black) with the included rods, BH #ZAZBREFM45.

Q: 3. will this work with Tilta Full Camera Cage Bundle Basic Edition for Canon EOS R5 C?

A: Yes, the Tiltaing 15mm LWS Baseplate Type VI (Black) is compatible with the Tilta Full Camera Cage Bundle Basic Edition for Canon EOS R5 C.

Q: 4. Is a redrock micro follow focus and mattbox compatible with this rig?

A: depending on the lens, you might possibly need short rod extensions. other than that, the Redrock FF and Matte Box will work.

Q: 5. Is it compatible with Tilta BMPCC 4K/6K cage?

A: No it is not. It is designed specifically for the 6K Pro Cage

Q: 6. I'm lookin for something to safetly support a Sony FX6 with a SIGMA 150-600mm lens, so that they can be mounted and balanced on a tripod gimbal head, AND removed an carried around as a [camera-and-lens] unit between set-ups. I do not need a shoulder mount for shooting. Would this baseplate be overkill for my purposes? Can anyone recommend anything less elaborate that would be suitable? Thanks.

A: You could consider this baseplate - Kondor Blue Universal 15mm LWS Bridge Plate for ARRI/RED/URSA/C70/VENICE (Raven Black) BH #KOUARRIBRPBK https://bhpho.to/3saiaCM 15mm Rods - https://bhpho.to/3eLs3no

Q: 7. How does one attach a manfrotto base plate without it wiggling on the Titla center screw ports? The Titla has only a thin ridge with no support on the sides for these plates!

A: Using 2 screws to secure the baseplate to your tripod plate will prevent it from wiggling or rotating.

Q: 8. Will any dovetail plates work on the top part or will the part with the tilta logo block it off?

A: The Tiltaing 15mm LWS Baseplate Type IV (Black) (B&H# TITABSP415B) has a non-removeable stop to prevent a dovetail plate from sliding forward and off the baseplate. That is the part with the Tilta logo on it. There is no dovetail plate yet designed to defeat that safety feature.

Q: 9. Does this fit with the new RED Komodo X Tilta cage?

A: Yes, the Tilta Tiltaing 15mm LWS Baseplate Type IV (Black) is compatible with the new RED Komodo-X camera cage.

Q: 10. It works with KOMODO TILTA KIT A?

A: We have not tested that particular pairing. The recommended baseplate for that Kit A is https://bhpho.to/3JO7SQg