The tan B2D Directional Lavalier Mic, Low Gain, with Detachable LEMO 3-Pin Connector Cable for WisyCom Wireless Transmitters from Countryman features a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers the lowest gain for powerful vocals such as in opera, which requires a higher overload level. In addition, the B2D lavalier is equipped with a detachable cable that terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

Hypercardioid Pattern    Fits WisyCom Transmitters    Headroom for Operatic Vocals    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Low (blue band, -20 dB re W4) for operatic vocals

Related Questions and Answers

Q: 1. Does it work with A7R4? I intend to make a HDR time lapse.

A: Yes, this remote is compatible with the A7R4.

Q: 2. Will vello ShutterBoss II wireless work with Nikon D500

A: I had to connect the release with the cable to my D500 because the battery in the receiver was dead when I went to use it and that worked just fine.

Q: 3. Can the Vello ShutterBoss II also trip the record button/function for making videos? I use a Nikon D750 camera.

A: Yes. The D750 has the ability to assign the shutter button to start/stop video recording. The instructions to do so are found on page 373 of the Nikon D750 user's manual: https://bhpho.to/3gyrFH5 Once the shutter button is the start/stop button for video, this remote, which activates the shutter button, can start and stop the video.

Q: 4. I have the Sony a7 (version 1). Are there any features of this remote that won't work with the original a7?

A: This would work with the original Sony Alpha A7

Q: 5. Does it work with canon 6 D mark II

A: If the camera model has a sub mini connection it will work but not if your camera has a 3 pin connection. Check what kind of connection your camera has to make sure you get the right product.

Q: 6. Will it work with a Canon EOS T1i?

A: The Canon EOS T1i works with the Vello ShutterBoss II Timer Remote Switch for Canon with Sub Mini Connection, BH #VERCC12 specifically. https://bhpho.to/3AOtZlq

Q: 7. Is it possible to change shutterspeed/aperture/iso of the camera through this controller while a timelapse is active?

A: Not through the controller, but you can on the camera body itself.

Q: 8. Does this work on an Olympus E-M1 Mark iii

A: Yes, this will work in the Sub-Mini (2.5mm) port on the Olympus E-M1 Mark III.

Q: 9. Can I control multiple cameras if I use a cable splitter?

A: Unfortunately, we do not know as this cable was not designed for the purpose of being split to control multiple cameras. A cause of concern may be that by spitting the cable, the operating voltage may fall below what is needed to trigger the camera. As such, I would state to purchase and experiment at your own risk.

Q: 10. It will work with fuji xt2?

A: No, this is listed as compatible with Canon, Pentax, Samsung and Sigma. The B&H # VERCWIINK would work with Fujifilm and Nikon cameras.