The cocoa Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and 1/4" Connector for Line 6 Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 1/4" connector for direct connection to Line 6 TBP06 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Line 6 Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with the Sanken CS-M1?

A: Yes, the Rycote Standard Hole Classic Softie Wind-Screen (2.7", 0.7 to 0.8" Diameter Hole, Gray) will be compatible with the CS-M1.

Q: 2. Can the Sony A7II fit in this

A: No, the Sony A7II would not fit the SmallRig Standard Accessory Kit for Blackmagic Pocket Cinema Camera 6K Pro. Cage models for the A7II. https://bhpho.to/3HwleB3

Q: 3. Hello. I have a sony hx90v that also has a muti-terminal port. Will this intervalometer work for this camera? I have searched everywhere and my camera is not listed in any of the compatibility list although it has a multi-terminal. Thank you!

A: This remote switch is compatible with all Sony cameras with a multi-terminal connection. The HX90V is listed on the B&H web page as one of the compatible cameras.

Q: 4. Does this fit the Deity S Mic 2s?

A: This will: Rycote 18cm Super-Softie Wind Shield for Shotgun Mics (Standard Hole) B&H # RYSS18M

Q: 5. Is there a replacement screw for purchase for the screw that tightens the ssd on the bottom of the cage? I lost mine unfortunately. It appears to be the same size screw that holds the cage halves together.

A: We do not sell individual screws for the SmallRig Standard Accessory Kit for Blackmagic Pocket Cinema Camera 6K Pro, however we do carry a set of screws, the SmallRig Screw Set for Video/Photo Equipment. It includes: Two 1/4"-20 slotted screws Eight 1/4"-20 socket screws Two 3/8"-16 slotted screws Four M2 screws Two M2.5 hexagon socket screws Four M3 screws Four M4 hex socket screws https://bhpho.to/3JK7jtm

Q: 6. Hello. Is ssd sandisk 2 Tb okay for this cage?

A: The SmallRig Standard Accessory Kit for Blackmagic Design Pocket Cinema Camera 6K Pro/6K G2 SSD holder will fot a 2TB drive as long as it is the Samsung T5 2TB, as it is made for the T5 drives only.

Q: 7. Does the controller let you know when it has successfully communicated to the receiver?

A: I haver not noticed that it does. However the Nikom shutter is so load that there is no question as to when it is activated

Q: 8. Does this work with the shooting grip attached?

A: The Sony RX100 VI will not fit in the Fantasea Line FRX100 VI housing with the grip attached.

Q: 9. For the HDMI/USB cable clamp, are you able to open and close the protective flaps covering the ports with this attached? Or do you have to take them off (leaving the ports exposed) to use this?

A: The protective flaps need to be taken off when using the HDMI/USB cable clamps.

Q: 10. hi, can i use this on my a7s2 in manual movie mode to start and stop video?

A: No, the Vello Shutterboss II would only allow for photography functions on the A7S II.