The cocoa Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and cH-style 4-pin Connector for Audio Technica Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-T5201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What is the ball-tightening lever made of, plastic or metal? And can it be re-positioned, or is it fixed on its axle?

A: Oben MBH-11 Dual-Action Mini Ball Head with Arca-Style Quick Release Plate is made with metal parts. You can articulate the angle of the ball head as it is displayed on the images on our website.

Q: 2. there are different models for tascam vs zoom. why? and are either suitable for zoom h1n, which is not mentioned? thanks.

A: The H1n is quite a bit smaller than the other recorders, so it will not have a snug fit. You can use the Rycote 041119 recorder suspension system, though: https://www.bhphotovideo.com/c/product/758975-REG/Rycote_041119_041119_Portable_Recorder_Suspension.html

Q: 3. Can these be charged with the Frezzi FQC-NP1 Quick Charger for NP-1?

A: Yes, The Frezzi FQC-NP1 Quick Charger for NP-1 can be used with the IDX System Technology NP-9X which is an NP-1 style Li-Ion battery. Charger link - BH #FRFQCNP1 https://bhpho.to/3UHWQBw

Q: 4. How wide is the base of the ball head?

A: The base of the Oben MBH-11 Dual-Action Mini Ball Head is 29mm wide.

Q: 5. Will this work on a Schoeps Mini CMIT?

A: The hole is the correct size, but the length is a bit too short for the Schoeps MiniCMIT. The Standard Hole Classic Softie that Rycote recommends for this mic is the 5,9" length which is B&H # RYS15M.

Q: 6. Will this fit the original Ronin S as well?

A: Yes it will.

Q: 7. Can head be used with 1/4"-20 bottom connector in addition to 3/8"-16 Female connector?

A: Yes, the Oben MBH-11 Dual-Action Mini Ball Head natively has as 3/8 inch female thread on the on bottom. It also comes with a tripod bushing. That makes it 1/4 inch that is needed.

Q: 8. will this fit on manfrotto 190CXPRO3?

A: Yes, the Oben MBH-11 Dual-Action Mini Ball Head with Arca-Style Quick Release Plate is compatible with the Manfrotto 190CXPRO3.

Q: 9. Does this unit have a peak warning light?

A: Yes, the AMS-22 USB-C Audio Interface has a peak indicator. The Green 'sig' light will turn red in the event of a clip.

Q: 10. Will this work with the Sanken CS-M1?

A: Yes, the Rycote Standard Hole Classic Softie Wind-Screen (2.7", 0.7 to 0.8" Diameter Hole, Gray) will be compatible with the CS-M1.