The black iFi Micro iPhono3 Black Label is a low-profile home phono amplifier featuring audiophile components and built to exacting standards to provide outstanding sound quality for dedicated vinyl enthusiasts. The amplifier uses iFi's Class-A TubeState technology, which emulates many of the best characteristics of analog tube audio using compact, less expensive, and cooler-running solid-state circuitry.

The Micro iPhono3 Black Label delivers performance rivaling amplifiers costing much more, delivering 35 to 72 dB of gain, with a 108 dB dynamic range and a signal-to-noise ratio of 85 dB. Two pairs of RCA inputs are provided, one for use with MM cartridges and the other for use with MC cartridges; a ground connection for the turntable is also provided. A 3-position switch and numerous dip switches on the underside of the unit allow you to customize settings and select between 6 EQ curves: RIAA, eRIAA, IEC, and eRIAA + IEC/Decca/Columbia. A stereo pair of RCA outputs is provided.

Audiophile-Grade Components    108 dB Dynamic Range    85 dB Signal-to-Noise Ratio    Inputs for MM and MC Cartridges    6 Selectable EQ Curves    Class-A Solid-State Circuitry    Emulates Best of Tube Characteristics    Includes iPowerX Power Supply

• Super-quiet 85 dB noise floor
• Phono stage circuitry uses only audiophile-grade components from Burr-Brown, TDK, and Nichicon
• Computer-matched op-amps
• High-gain, bipolar output transistors to Nichicon audio-grade capacitors
• THD of < 0.005%
• TubeState technology uses reliable Class-A solid-state circuity to emulate analog tube performance while maintaining low noise floor

• Precise EQ curve and explosive 108 dB dynamic range; your listening room becomes a concert hall
• The AMR PH-77, the $12,000 larger sibling with 23 equalization curves is the company's flagship amp; the trickle-down technology used in the streamlined iPhono3 Black Label means it features the 6 most popular stereo EQ curves in a more portable, cost-effective version

• Your pickup (stylus) has been lovingly crafted, whether it’s MM or MC, no two cartridges are identical in performance
• The Micro iPhono3 Black Label, like the AMR PH-77 from which it descends, enables you to set the precise load/gain for the cartridge you have, so you can squeeze every last drop of performance out of your pickup
• Set just once, then sit back and enjoy

• The iPower X provides an effective, clean power solution that uses Active Noise Cancellation II to cancel all incoming EMI or RFI noise from the system
• Extra input and output capacitance gives you more filtration, improved dynamics, and outstanding sound quality
• Wall and barrel adapters included

Related Questions and Answers

Q: 1. Will this work with a Hasselblad x1dii to connect a canon flash trigger to a Profoto B10?

A: Yes, the Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection is compatible with the Hasselblad X1D II.

Q: 2. will this work with a sony a6000 to plug a microphone into it?

A: No. We highly suggest the following item Revo Hot Shoe to 1/4"-20 Male Post Adapter BH #RESACS14M • MFR #SA-CS-14M https://bhpho.to/3sl559F

Q: 3. I have a Canon 7( no accessory shoe, 1960's rangefinder) and a Godox TC330 flash, will it work?

A: No, the Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection would not work in usage with the Canon 7 Rangefinder and the Godox TC300 Studio Flash Light.

Q: 4. will this work for nikon f2 ?

A: Yes, the Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection will function on a Nikon f2 Film Camera.

Q: 5. Will this work with a Profoto a10 flash? I would like to use it on a hasselblad 503cw. Thanks

A: The Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection will allow the Profoto A10 AirTTL-N Studio Light to sync at the center contact of the hot shoe and trigger in manual mode. The Hasselblad 503cw camera series do not have a port or a hot shoe to connect this adapter. Instead, you will need a lens with the sync port and a PC male to PC male sync cord.

Q: 6. Will it be able physically fit an iPhone 6s Plus? It's 77.9mm and slightly more than what it is supposed to accommodate.

A: No, sorry but it want fit. The holder expands at maximum up to 73mm. Regards, Piotr

Q: 7. Will this work with Olympus om1

A: The Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection is indeed compatible with the Olympus OM-1.

Q: 8. I saw that you responded that this will work with a Leica Q3. please confirm that it will also work with a Leica M6?

A: The Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection has a center pin connection. It will work on any hot shoe with a center contact like the Hotshoe on the Leica M6 Rangefinder Camera.

Q: 9. I want to use the stand with point & shoot camera. Can the stand be unscrewed from the phone holder?

A: Yes, the smartphone holder can be unscrewed from the tripod on the JOBY GripTight ONE Micro Stand for Smartphones (Black/Charcoal) BH #JOJB01492.

Q: 10. how far does the arm extend?

A: Using the included aluminum shafts it can extend 2 , 4 or 6 .