Cinema Devices Riser For Ergorig Undersling
- Product Code: ga199695
-
The Riser for Ergorig Undersling from Cinema Devices enables you to boost your suspended camera's pick point by around 6". This increases the camera movement range, easing the shift from underslung to shoulder-mount use. It also suspends the camera further away from the operator's body for easier maneuvering.
This riser rod comes with screws and mounting hardware.
Raises Pick Point for Camera Suspension Increases Range by Approximately 6" Eases Camera Shift to Shoulder Suspends Camera Further from Body For Ergorig Undersling Rig
Parameters | |
---|---|
Effective Length | 6" / 15 cm |
Weight | 1 lb / 454 g |
Packaging Info | |
Package Weight | 0.6 lb |
Box Dimensions (LxWxH) | 11 x 8.2 x 2.1" |
For Ergorig Undersling camera suspension rig
Raises pick point of suspended camera by about 6"
Enables easier shift from underslung to shoulder-mounted use
Places camera further away from operator's body for easier maneuvering
Related Questions and Answers
Q: 1. Is this MLC or SLC?
A: This memory card is built with MLC.
Q: 2. Has anyone used this on the Ursa Mini 4.6 k in 60 FPS?
A: I have. This card rocks, I bought two of them. Pro Res 422 4.6k at 60fps works great. You'll need two of these cards though (shooting in dual card mode) to do 4.6k 60fps 3:1 or 4:1 raw capture without dropping frames. A single card is fine for 4.6k 3:1 24fps capture though.
Q: 3. works with BMD Pocket 4K?
A: The Delkin Devices 128GB Cinema CFast 2.0 Memory Card is compatible with the Blackmagic Design Pocket Cinema Camera 4K.
Q: 4. I just bought this memory card and when I hooked it up to the card reader, it didn't show up the computer. I also just bought they excellon card reader from this site, has anyone had trouble trying to get the card reader or the memory card to work? I am not sure which of the two is not working?
A: I only can use the card in final cut pro it do not work in imovie on my apple Computer.
Q: 5. I'm looking for some cards for shooting event work at 1080p24. I know these won't be up to the speed of my Lexars, but will these work flawlessly for lower bit-rate applications?
A: I've used it on my BM Ursa mini at 4K 25 fps with no problems what so ever. Great card with a very competitative price. Highly recommended.
Q: 6. Has anyone used these cards for the Canon 1DX Mark ii for 4k 24, 30 and 60fps?
A: The Delkin Devices 256GB Cinema CFast 2.0 Memory Card would be compatible for use with the Canon EOS 1DX Mark II DSLR Camera for 4K UHD video recording at all frame rates. Simply ensure that you format the memory card in the camera before usage.Canon states on page 316 of the Canon EOS 1DX Mark II DSLR Camera's instruction manual that a CFast 2.0 memory card is required for recording 4K UHD video at 59.94p or 50p frame rates. CFast 2.0 is also recommended for the slower 23.98p, 24p, 25p, and 29.97p frame rates, though you may use a CompactFlash card that is UDMA 7 and has a 100MB/sec. or faster write speed.
Q: 7. Can someone who owns this run blackmagic disk speed test on it and post the results?
A: Unfortunately we are not set up to do tests like this, but perhaps you could contact the manufacturer for more in-depth specifications and testing.
Q: 8. 2 questions.. 1. Will this fit properly and securely on gitzo traveler kit gt1545T+gh1382tqd? 2. Can I stack 2 of these units one on top of the other securely with no mechanical slop or wobbel-if stacked, should they be locktited (blue).. Thanks
A: The Acratech Tripod Head Riser, 2" has a 60mm diameter so it woudl hang over the edge of the the Gitzo GT1545T which has a 37mm diameter. Stacking 2 of the risers is physically possible but as a tripod head is raised higher by either a column or a riser, it increases the risk of shaking especially with long lenses.
Q: 9. Has anyone tried it on the Blackmagic Pocket Cinema Camera 4K?
A: This card is not on Blackmagic's approved list of CFast 2.0 cards for use with the Pocket Cinema Camera 4K at this time.
Q: 10. What is the height limit? Asking at I am 6’6”.
A: Cinema Devices says that it works with all body sizes. Also - What size should I get? Measure from your front hip point to the top middle of your shoulder. If you're less than 20" order a small. Your front hip point is the part that feels like the tip of the triangle in your hip on the front side that is right around your belt line. If you would like us to check further with CD send us an email request to - provideo@bhphotovideo.com
Top Bestselling Products
Easyrig Cinema 3 200n With 9" Extended Arm
$12,090.00 $16,200.60
Jason Cases Blackmagic Pocket Cinema 4k Camera Case With Red Overlay
$1,197.00 $1,568.07
Portabrace Backpack For Blackmagic Pocket Cinema/cinema 4k Camera
$882.96 $1,271.46
Zuma Body Cap For Leica M Mount Cameras
$35.85 $54.49
Blackmagic Design Pocket Cinema Camera 4k
$3,570.00 $5,426.40
Blackmagic Design Pocket Cinema Camera 4k/hdmi Monitoring Kit
$5,097.00 $7,135.80
Blackmagic Design Pocket Cinema Camera 6k/4k Battery Grip
$765.00 $1,086.30
Alzo Cinema Camera Transformer Rig
$155.58 $213.14
Alzo Cinema Camera Transformer Rig Full Gear Kit
$244.65 $352.30
Zhiyun Cinema Camera Control Cable For Crane 3s (canon)
$30.00 $47.70
Canon Eos C200 Cinema Camera (ef-mount)
$10,497.00 $13,331.19
Swarovski 8x25 Cl Pocket Binoculars (green, Wild Nature Accessories Package)
$2,847.00 $4,242.03
Blackmagic Design Pocket Cinema Camera 4k
$3,885.00 $5,205.90
Products You May Like
Makerbot Method Performance Base Station
$8,985.00 $13,028.25
Tiffen 5 X 6" Decamired Blue 6 Cooling Glass Filter
$1,177.50 $1,754.47
B+w Pro Snap-on Lens Cap (62mm)
$35.64 $43.84
Black Box Gigabit Ethernet Extreme Temperature Managed Switch
$2,422.50 $3,270.38
Tilta Top Handle For Red V-raptor
$597.00 $847.74
Urth Adapter Ring For Magnetic Lens Filters (46mm)
$57.00 $70.68
Nanuk 909 Hard Case With Foam (graphite, 4.8l)
$117.00 $142.74
Peak Design V2 30l Everyday Backpack Divider (cool Gray)
$44.85 $64.14
Sigma 100-400mm F/5-6.3 Dg Os Hsm Contemporary Lens For Nikon F
$2,397.00 $2,972.28