The white B2D Directional Lavalier Mic, Low Gain, with Detachable 3.5mm Locking Connector Cable for Audio 2000's, Gemini, and Sennheiser Wireless Transmitters from Countryman features a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers the lowest gain for powerful vocals such as in opera, which requires a higher overload level. In addition, the B2D lavalier is equipped with a detachable cable that terminates to a 3.5mm locking connector for direct connection to Audio 2000's, Gemini, and Sennheiser AWX6030M, UHF-6000BP, SK 100 G1, SK 100 G2, SK 100 G3, SK 100 G4, SK 1093, SK 20, SK 300 G1, SK 300 G2, SK 300 G3, SK 300 G4, SK 500 G1, SK 500 G2, SK 500 G3, SK 500 G4, SK AVX, SK D1, SK-XSW, SL Bodypack DW, and XSW-D TX35 wireless bodypack transmitters.

Hypercardioid Pattern    Fits Audio 2000's, Gemini, and Sennheiser Transmitters    Headroom for Operatic Vocals    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Low (blue band, -20 dB re W4) for operatic vocals

Related Questions and Answers

Q: 1. which tube is the original one which comes with gemini monolight? clear or uv coated?

A: The original bulb shipped with the following unit is UV bulb. Please review the following item for your flash tube needs Photogenic Bowens-Type FT750 UV Flash Tube for Travelite, Esprit & Gemini BH #PHFT750UV • MFR #907694 https://bhpho.to/3rKCv20

Q: 2. What makes sennheiser's fur any different than a much more inexpensive brand please?

A: Sennheiser's long track record for quality in assurance, materials, and workmanship is difficult to match.

Q: 3. What's the Equivalent Input Noise (EIN) ? Thanks

A: The manufacturer has not specified what the EIN is for the Zoom F2 Ultracompact Portable Field Recorder with Lavalier Microphone.

Q: 4. Can you have 2 mics recording at once with this device for an interview?

A: No. This will ony allow recording form one microphone.

Q: 5. Will it work with Deity V mic d3 pro?

A: You can plug a Deity V MIc D3 Pro shotgun mic into this recorder, but be aware that the mic's attached cable does not have a threaded sleeve on the end, which the Rode F2 mic input is expecting. There is a chance that the mic can pop out. Make sure contact is being made, and perhaps secure the connection with a piece of gaffers tape.

Q: 6. Can I use the Mic input to record audio from output of any Aux out of a mixer, ? or would i need an adapter for that input?

A: In order to record audio from the aux output of a mixer on the Zoom F2 Portable Field Recorder, you will need to use a combination of adapters. The 3.5mm input on the F2 uses a locking connector and it accepts mic level signal, so you will need to use a line-to-mic attenuator to convert the line level output from the mixer to a mic level signal. If the mixer has a 3.5mm TRS aux output, you can use the Kopul ACH4-25MON Line-to-Mic Attenuator Cable (B&H # KOACH425MON), then add on a female coupler like the Hosa Technology GMM303 3.5mm Female Stereo Mini to 3.5mm Female Stereo Mini Adapter (B&H # HOASMFSMF). Finally, to connect to the locking input on the F2, attach the Sennheiser CL1 3.5mm to 3.5mm Cable (B&H # SECL1).

Q: 7. Could the headphone or line output somehow feed a mirrorless camera or would the camera's mic be a better reference track? Too bad there are no camera recording 32bit.

A: If you were to being using this recorder close enough to the camera that you could run an extension cable coupled with an attenuator cable, then yes, you could connect the headphone out to the camera. However, since this was designed with the intention of allowing mobility while recording, we'd suggest using a separate dslr mic on camera for quality scratch audio, such as this B&H # ROVMPR.

Q: 8. Will this fit a Nikon Z6 II?

A: Yes, the Vello VB-2000 ActionPan Pro Stabilizing Action Grip/Handle is compatible with the Nikon Z6 II Mirrorless Camera.

Q: 9. In the basic microphone product pictures, the last picture shows the locking TRS plug terminating to a lightning plug in the iPhone picture. Is that included???

A: No, the cable that is shown in the last photo terminates to a USB-C connector and it is the Sennheiser CL 35 USB-C Locking 3.5mm TRS to USB Type-C Coiled Cable (B&H # SECL35USBC) which is sold separately. Sennheiser does not offer any cables that terminate to a Lightning connector but we do have a compatible Lightning cable that will work which is the Saramonic LC-C35 Locking 3.5mm Connector to Apple-Certified Lightning Output Cable (B&H # SALCC35). The other option for connecting the mic to an iOS device with a Lightning connector is to use the Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP) together with the TRRS cable that is already included with the mic, which is the Sennheiser CL 35 TRRS Locking 3.5mm TRS to 3.5mm TRRS Coiled Cable (B&H # SECL35TRR).

Q: 10. How much does this weigh (without mic or fur)?

A: The Rycote 010324 Windshield Kit weighs 380g.