Designed exclusively for the K150P filter holder from Kase, this 150mm Magnetic ND Filter features 1.5mm thick optical glass with Nano coating. Attaching magnetically to the optional K150P, it darkens your image by three stops of light. This filter is not water resistant.

Nano Coating    1.5mm Thick Optical Glass    Attaches Magnetically to Kase K150P

Related Questions and Answers

Q: 1. Wats the maximum nd minimum height of this tripod?

A: The Joby GorillaPod 3K is a mini tripod, meaning the height of the tripod is fixed and cannot be adjusted.

Q: 2. Does the Joby GorillaPod5K Flexible Mini-Tripod come with a 3/8" stainless bushing which would allow me to use a small RRS BH-30 tripod head?

A: Yes, the "In The Box" section under the Overview tab under the JOBY GorillaPod 5K Flexible Mini-Tripod states that a 3/8"-16 Screw Thread Adapter is included with the purchase of the tripod (along with the Limited 1-Year Warranty). The 3/8"-16 thread adapter at the top can be removed to reveal a 1/4"-20 screw, so you may use tripod heads that have either a 1/4"-20 or a 3/8"-16 female tripod socket on the base of the tripod head.

Q: 3. Can I put a small Leitz ballhead on this and still tilt vertically?

A: Yes, you can put a Leitz ball head on this, just make sure the head has a 1/4-20" female thread on the bottom and if not you will need to get a reducing bushing if it is 3/8." Make sure you don't exceed 6 lbs with the head and camera. Using the head vertically on this pod is not advisable, it will most likely be too top heavy and fall over.

Q: 4. Are all metal parts made with stainless 316? Or 304?

A: Please contact Joby for that information. Tel: (707) 827-4000 Website http://www.joby.com/ Email info@joby.com

Q: 5. Does this hold a Rebel T6 camera with a 75 - 300mm lens?

A: The JOBY GorillaPod 5K Flexible Mini-Tripod with Ball Head Kit is rated to support up to 11 pounds so it will support the Canon T5 with a 75-300mm lens.

Q: 6. Is there stiffness information for the legs?

A: I'm sorry that information is not available but the load capacity should help to answer that question. The load capacity is 11lbs.

Q: 7. Will this work with my Nikon d7200 and tamron 16-300mm lens? Thanks

A: This tripod will easy hold that camera and lens.

Q: 8. Will the ball head work with the Peak Design Dual Plate v2 I have on my camera? https://www.bhphotovideo.com/c/product/1372682-REG/peak_design_pl_d_2_dual_plate.html

A: As the Joby GorillaPod 5K Flexible Mini-Tripod with Ball Head Kit is compatible with Arca-type quick release plates, yes, the Peak Design Dual Plate v2 for Capture Camera Clip should be compatible for your usage needs with the Joby GorillaPod 5K Flexible Mini-Tripod with Ball Head Kit.

Q: 9. Is this compatible with a canon eos M50 with a 18-155 lens?

A: The camera and the lens weight 1.14 lbs / 517 g well below the capacity of the Joby GorillaPod 1K Load Capacity: 2.2 lb / 997.9 g.

Q: 10. Will the Peak Design Dual Plate v2 work on this ball head?

A: Yes, as the Peak Design Dual Plate v2 for Capture Camera Clip is Arca-Type compatible, and as the ball head on the Joby GorillaPod 5K Flexible Mini-Tripod is also Arca-compatible, you may use the Peak Design Dual Plate v2 on the Joby GorillaPod 5K Flexible Mini-Tripod.