The cocoa Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 1/4" Connector for Line 6 Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 1/4" connector for direct connection to Line 6 TBP06 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work on the new Fuji X-T4? Has usb C connection and mini hdmi connection.

A: Not quite, as per Fujifilm's X-T4 manual, the remote jack is 2.5mm (Sub-Mini)

Q: 2. Can I use this for HDR timelapse on Sony A7SII (i.e. Drive mode set to Continuous bracketing - for each frame is taken 5 exposures) and then start timelapse?

A: I do not think you can take HDR photos with this. But to make sure call the BH technician and talk to him.

Q: 3. Can the Sony A7II fit in this

A: No, the Sony A7II would not fit the SmallRig Standard Accessory Kit for Blackmagic Pocket Cinema Camera 6K Pro. Cage models for the A7II. https://bhpho.to/3HwleB3

Q: 4. Does this work with the shooting grip attached?

A: The Sony RX100 VI will not fit in the Fantasea Line FRX100 VI housing with the grip attached.

Q: 5. Would this mic work with a computer - like a MacBook? I need a mic for Zooming.

A: No, it will not. But the Saramonic SmartMic will work for MacBooks when plugged into the headphone port: https://www.bhphotovideo.com/c/product/1282307-REG/saramonic_smartmic_flexible_microphone_for_iphone.html

Q: 6. Will this work with the Sanken CS-M1?

A: Yes, the Rycote Standard Hole Classic Softie Wind-Screen (2.7", 0.7 to 0.8" Diameter Hole, Gray) will be compatible with the CS-M1.

Q: 7. will this work with a FujiFilm X-Pro-2 camera? it has the same plug in as the Sony

A: Page 72 of the Fujifilm X-Pro2 Mirrorless Digital Camera's instruction manual states that Electronic releases from third-party suppliers can be connected via the microphone/remote release terminal. A confirmation dialog will be displayed when a third-party release is connected; press MENU/OK and select REMOTE for MIC/REMOTE RELEASE. Page 45 of the manual indicates the Mic/Remote terminal is a 2.5mm sub-miniphone terminal, not the terminal used with the Sony camera. As such, the remote you list above would not be compatible for your needs. The Vello ShutterBoss II Timer Remote Switch for Canon with Sub Mini Connection, B&H # VERCC12, would be the correct remote for use with the Fujifilm X-Pro2 Mirrorless Digital Camera.https://a href= http://static.bhphotovideo.com/lit_files/152675.pdf target= _blank static.bhphotovideo.com/lit_files/152675.pdf/a

Q: 8. With this work on the d500

A: Yes, this remote is compatible with the Nikon D500.

Q: 9. Will this unit work with Nikon D780?

A: Yes Vello ShutterBoss II Timer Remote Switch for Nikon with DC2 Connection is compatible with the Nikon D780.

Q: 10. Will this work with the new Sony RX100 VA?

A: The Vello ShutterBoss II Timer Remote Switch for Sony Multi-Terminal B&H # VERCS2II has replaced the release you were asking about. It will work with the RX100 VA. Also consider using your smartphone to remotely fire your camera; all it takes is an app. The really cool thing is that you can see what the camera is looking at on your phone. You can adjust exposure and focus as well as the shutter.