The cocoa Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm locking Connector for Azden Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Azden older 10BT and 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Do you ship this product to Finland? If, what are shipping costs, are there any other fees such as taxes?

A: Yes, this item is available for shipping to Finland. To calculate shipping costs, taxes, duties, and total expenses, simply add the item to your cart and and click on view cart, which will show you the available shipping and payment options. The tax calculation on our website is available for Canada, select European countries, and Brazil only.

Q: 2. Is there an adapter to change the 3-pin to a sub mini pin or visa-versa? Older camera & newer camera, but only need one Timer Remote.

A: No this is made for a specific camera you have to find one that fits and is made for your camera the lists of cameras it will fit are always stated

Q: 3. HiWill it work with Nikon D3000?Thanks

A: This has bee Designed For Use With: Dot Line DL-MEX Kenko Auto Extension Tube Movo Photo EXT-N25 Nikon COOLPIX P1000 Nikon COOLPIX P950 Nikon Coolpix A Nikon Coolpix P7700 Nikon Coolpix P7800 Nikon D3100 Nikon D3200 Nikon D3300 Nikon D5100 Nikon D5200 Nikon D5300 Nikon D5500 Nikon D5600 Nikon D600 Nikon D610 Nikon D7000 Nikon D7100 Nikon D7200 Nikon D750 Nikon D7500 Nikon D780 Nikon D90 Nikon Df Nikon PK-11A Nikon PK-13 Nikon Z5 Nikon Z6 Nikon Z6 II Nikon Z7 Nikon Z7 II Vello EXT-N1E Vello EXT-ND Vello EXT-ND2 Vello EXT-NFM Viltrox Automatic Extension Tube

Q: 4. How is the Shutter Boss II different than the original version?

A: The main difference is it can be set up to shoot 1-999 shots and version 1 is 1-99.

Q: 5. Would this mic work with a computer - like a MacBook? I need a mic for Zooming.

A: No, it will not. But the Saramonic SmartMic will work for MacBooks when plugged into the headphone port: https://www.bhphotovideo.com/c/product/1282307-REG/saramonic_smartmic_flexible_microphone_for_iphone.html

Q: 6. can this be used to start & stop video recording? Canon T5i

A: This remote cannot be used for video.

Q: 7. Does this work with the D3400? Also does it help shoot timelapse video?

A: No, the D3400 does not take a plug in remote. It takes an infrared remote or you can pair it with a smartphone using bluetooth.

Q: 8. Is this compatible with nonSony lenses on the A7II?

A: I use this product regularly with my A7II with no problems.Since it plugs into the side of the camera, there really shouldn't be a problem. If you are using a lens adapter you'll need to shoot manually using peak focusing.

Q: 9. How do I get a Canon Rebel T6 to complete all shots in bracket mode (AEB) with the Shutterboss in Interval Mode? I have the camera on burst and AEB, which works fine and gives me three bracketed shots when I hold the camera's shutter button down, but the Shutterboss only depresses the shutter long enough for the next shot of the bracket.

A: Have to change the mode on the Shutterboss to get more than one shutter press. There are a couple of ways to do this. One, just push the right button on the Shutterboss and it will change the single box at the bottom of the display (shutter controls) to a continuous shooting box. This will have it press the shutter multiple times in a row until you let go, but doesn't stop at the end of your bracket. The better way, IMO, is to keep pressing to the right until you get to the intervalometer settings. I leave DELAY at zero, LONG at zero, INTVL at 1 second and change N to the desired number of bracketed shots (press and hold the center button of the directional pad to change). This way, one button press of TIMER START/STOP (not the shutter button) will automatically press the shutter button the desired number of times and stop.Hope this helps!

Q: 10. Will this work with Canon EOS Rebel?

A: I have a Rebel XS. Make sure you have the right connector. In the rebel series it uses the Sub Mini Connection. It works perfectly with my Rebel XS