The light beige Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and TA3F Connector for Audix Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a TA3F connector for direct connection to Audix RAD360-BP wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Audix Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. is this compatible with the sony a6000?

A: Hi Jose, The Westcott FJ400 400Ws Strobe is compatible with the Sony a6000. You will need the Westcott Sony Adapter in order to mount the transmitter to the camera. Follow the link below to view it. https://www.bhphotovideo.com/c/product/1508117-REG/westcott_4711_fj_x2m_sony_adapter.html

Q: 2. Can you use Chimera soft boxes with the Westcott FJ400? And if so, what is the adapter ring you need? Thank you.

A: The FJ400 can be used with Chimera softboxes. It has a Bowens S type mount, which can use a ring such as the Chimera Quick Release Speed Ring for Bowens Esprit (Small) Series, BH # CHSRQRBSS. https://bhpho.to/3kAUiln

Q: 3. Is this fully compatible with a Fuji GFX100 and a Canon R5?

A: Yes, both of those cameras are fully compatible with the FJ Wireless System.

Q: 4. Comparing this to the Godox AD400Pro, the Godox has a power output range from 1/256 to 1/1. I see a YouTube video comparing the 2 of these but how the Wescott only goes as low as 1/64 but later fixed with s as firmware update. So what is the new power output range of the Wescott? Thank you

A: The power output on the FJ400 after that firmware change can go to as low as 1.56 watt seconds at its lowest power. 1.56ws is the equivalent of 1/256 power. The entire range of the FJ400 is from 1.56ws-400ws or 1/256-1/1.

Q: 5. nowhere in the specs does it show the size or weight. What are they?

A: The Size and weight on this Westcott FJ400 400Ws Strobe with AC/DC Battery (US/No. America Plug) is 11.5 in. long, 4.3 in. wide, and 4.8 in. tall. The weight with the battery is 5.4 lbs.

Q: 6. Is this compatible with the Mamiya RZ67?

A: Yes. But will have to be driven in manual mode.

Q: 7. How many lumens does the FJ400 produce?

A: The Westcott FJ400 400Ws Strobe with AC/DC Battery (US/No. America Plug) is a strobe/flash. They are not rated in Lumens like continuous lights. It is rated and watts and is 400 watts.

Q: 8. Will the umbrella receptacle accommodate the weight of a 7' parabolic umbrella?

A: We tested the Westcott FJ400 400Ws Strobe with AC/DC Battery with the Westcott 7' Umbrella, and it worked great.

Q: 9. Dose the trigger work with Sony a7r iii

A: The Westcott FJ-X2m Universal Flash Trigger for FJ400 Strobe would be compatible for use with the Sony Alpha α7R III Mirrorless Digital Camera with the additional purchase of the newly-announced Westcott Sony Adapter for FJ-X2m Flash Trigger, B&H # WEFJX2MSA.

Q: 10. Is continuous shooting compatible with the Panasonic S1? Or just Canon?

A: As of today, February 24, 2020, Continuous Shooting mode is available with the following Panasonic Cameras: GH5, S1. More will be added soon. The trigger is compatible with a large number of cameras from Canon, Nikon, Sony, Fuji, and Olympus as well. For a full compatibility list, visit www.fjwestcott.com/4705