The light beige Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and 3.5mm Connector for Amplivox Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm connector for direct connection to Amplivox S-1600T and S-1690T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Amplivox Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will the umbrella receptacle accommodate the weight of a 7' parabolic umbrella?

A: We tested the Westcott FJ400 400Ws Strobe with AC/DC Battery with the Westcott 7' Umbrella, and it worked great.

Q: 2. Is this fully compatible with a Fuji GFX100 and a Canon R5?

A: Yes, both of those cameras are fully compatible with the FJ Wireless System.

Q: 3. Comparing this to the Godox AD400Pro, the Godox has a power output range from 1/256 to 1/1. I see a YouTube video comparing the 2 of these but how the Wescott only goes as low as 1/64 but later fixed with s as firmware update. So what is the new power output range of the Wescott? Thank you

A: The power output on the FJ400 after that firmware change can go to as low as 1.56 watt seconds at its lowest power. 1.56ws is the equivalent of 1/256 power. The entire range of the FJ400 is from 1.56ws-400ws or 1/256-1/1.

Q: 4. Are these manufactured in China?

A: Yes.

Q: 5. Please resolve the conflicting answers about Canon ST-E3-RT compatibility: One staff answer says YES ST-E3-RT will trigger the FJ400. But another answer says NO, Westcott has now disabled this compatibility. So which is it?

A: Westcott has not disabled this compatibility. The ST-E3-RT DOES in face operate the FJ400 Strobe. It is done simply by matching groups, channels, and ID number of the ST-E3-RT and that of the FJ400.

Q: 6. Does this have a modeling light you can use for video?

A: No, the Westcott FJ400 Strobe 2-Light Location Kit with FJ-X3m Universal Wireless Trigger modeling light not designed for video purposes.

Q: 7. All of my light modifiers use an elinchrom mount....Is there an adapter I can purchase to be able to use my elinchrom modifiers?

A: Yes, Elinchrom makes three different speedrings which will allow their range of softboxes to be used with the Bowens mount that is used on the the Westcott FJ400 400Ws Strobe with AC/DC Battery. They have the Elinchrom Rotalux Speedring for Bowens Mount Lights, BH #EL26554 (https://bhpho.to/3Ps295D), the Elinchrom Snaplux Speed Ring for Bowens S-Mount, BH #EL26551 (https://bhpho.to/3LseuUd), and the Elinchrom Litemotiv Octa Bracket for Bowens S-Mount, BH #ELLMBB (https://bhpho.to/39HgnPp).

Q: 8. what about using bowens mount modifiers? for example the light dome 2 or light dome mini

A: It’s Bowen’s mount. Don’t know about your specific modifiers.

Q: 9. nowhere in the specs does it show the size or weight. What are they?

A: The Size and weight on this Westcott FJ400 400Ws Strobe with AC/DC Battery (US/No. America Plug) is 11.5 in. long, 4.3 in. wide, and 4.8 in. tall. The weight with the battery is 5.4 lbs.

Q: 10. Is there an adaptor to mount to Elinchrom modifiers?

A: Elinchrom makes three different speedings which will allow their range of softboxes to be adapted for use with Bowens-Mount flash products: The Elinchrom Rotalux Speedring for Bowens-Mount; the Snaplux Speedring for Bowens-Mount; and the Litemotiv Octa Bracket for Bowens-Mount.