The light beige Countryman E6X Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and TA4F Connector for Shure Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a TA4F connector for direct connection to Shure MXW1 and MXW1/0=-Z11 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Shure Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this come with an adapter for the sony wireless trigger?

A: Hi Aaron, The Westcott Sony Adapter for the flash trigger is not included in the kit. Here is the link to the adapter: https://www.bhphotovideo.com/c/product/1508117-REG/westcott_4711_fj_x2m_sony_adapter.html

Q: 2. Can you run this off AC power without the battery attached?

A: No, the AC power input is on the back of the battery. This allows you to charge the battery while shooting, so that you have a full battery when you want to be more portable.

Q: 3. Does this have a modeling light you can use for video?

A: No, the Westcott FJ400 Strobe 2-Light Location Kit with FJ-X3m Universal Wireless Trigger modeling light not designed for video purposes.

Q: 4. Is this product compatible with Sony A7R III

A: Yes it is. Enjoy.

Q: 5. All of my light modifiers use an elinchrom mount....Is there an adapter I can purchase to be able to use my elinchrom modifiers?

A: Yes, Elinchrom makes three different speedrings which will allow their range of softboxes to be used with the Bowens mount that is used on the the Westcott FJ400 400Ws Strobe with AC/DC Battery. They have the Elinchrom Rotalux Speedring for Bowens Mount Lights, BH #EL26554 (https://bhpho.to/3Ps295D), the Elinchrom Snaplux Speed Ring for Bowens S-Mount, BH #EL26551 (https://bhpho.to/3LseuUd), and the Elinchrom Litemotiv Octa Bracket for Bowens S-Mount, BH #ELLMBB (https://bhpho.to/39HgnPp).

Q: 6. how far behind are these two light kits

A: i think Mike means, how far behind in technology are these lights.

Q: 7. Are these weather resistant?

A: No, these lights are not weather resistant.

Q: 8. Does this kit include the strobe light? In the "in the box" tab it does not appear to be.

A: Yes, the FJ 400 is included in the Westcott FJ400 Strobe 1-Light Backpack Kit with FJ-X3m Universal Wireless Trigger kit.

Q: 9. Is this compatible with the Pentax K-1 II?

A: it is compatible in manual mode, it has not yet been tested to determine if it will perform TTL and HSS functions.

Q: 10. How can I get these triggered off my Pocket Wizards?

A: The FJ400 can be used with Pocket Wizards by plugging your receiver into the sync port on the bottom of the FJ400, and triggering it from your Pocket Wizard transmitter.