The light beige Countryman E6X Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and LEMO 3-pin Connector for WisyCom Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What other gels can use with this light?

A: you can use any gel with strobes. Just put the camera in Manual White Balance

Q: 2. I use Impact octabox and regular soft boxes, are there speed rings for these boxes?

A: The item is Impact "Luxbanx Speed Ring" SR-IMPV2

Q: 3. Does it work outside of USA like Ethiopia when it comes to the plug?

A: In Ethiopia the standard voltage is 220 V and the frequency is 50 Hz. You can use your electric appliances in Ethiopia, if the standard voltage in your country is in between 220 - 240 V (as is in the UK, Europe, Australia and most of Asia and Africa). So you would want to purchase the European version of the light.

Q: 4. What is the flash duration?

A: Please see the flash duration at t0.1 and t0.5 below: Flash Duration (t0.1) Normal: 1/280 - 1/3000s Freeze: 1/280 - 1/7000s Flash Duration (t0.5) Normal: 1/800 - 1/8500s Freeze: 1/800 - 1/19000s

Q: 5. Can the Westcott Lindsay Adler Optical Spot ( Owens Mount) be used with this strobe?

A: Yes, it pairs great with the FJ400

Q: 6. Can I use PocketWizards with the FJ400 if I want to just shoot High Speed Sync or do I have to get the FJ trigger?

A: For HSS you will have to use the Westcott transmitter.

Q: 7. is this compatible with the sony a6000?

A: Hi Jose, The Westcott FJ400 400Ws Strobe is compatible with the Sony a6000. You will need the Westcott Sony Adapter in order to mount the transmitter to the camera. Follow the link below to view it. https://www.bhphotovideo.com/c/product/1508117-REG/westcott_4711_fj_x2m_sony_adapter.html

Q: 8. To those who own this light, have you had any success using the modeling lamp for video?

A: The modeling light is a very nice daylight balanced Led making using it for video absolutely possible. However there are many variations involved with your question. It will depend on what you are trying to accomplish, the look you are going for, which modifier or soft-box you are using. etc.

Q: 9. Is it water resistant?

A: I'm sorry, no, this flash is not water resistant.

Q: 10. Does this have a photo cell. eye photo cell?

A: The Westcott FJ400 400Ws Strobe with AC/DC Battery (US/No. America Plug) BH #WEFJ400S has a optical sync.