Made of linear low-density polyethylene for its flexibility and high-tensile strength, this SKB Cases R-Series 3633-9B Waterproof Utility Case is made to withstand the most extreme and demanding shipping, handling, and working conditions on the planet. The case is offered here with an empty interior to allow for customization and full use of the interior space. Cubed foam, layered foam, and padded dividers are available separately. To accommodate a wide assortment of gear, this case has interior dimensions of 36 x 33 x 9" with a base depth of 6 inches.

Design features include gasket sealing to an IP67-rating to make it dust and waterproof, a molded-in steel hinge for added protection and durability, four large and recessed hinged handles (two on each side), and six powder coated stainless steel low-profile butterfly latches that hold the lid secure with a tight seal. It is further resistant to a variety of hazards that you may encounter such as impacts, ultraviolet (UV) radiation, solvents, corrosion, and even fungi. A pressure relief valve comes into play especially during air transport by regulating the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that may develop. SKB makes this R-Series case in the USA.

Airtight and Waterproof to Mil Specs    Built for Extreme & Demanding Conditions    Linear Low-Density Polyethylene    UV/Solvent/Corrosion/Fungus Resistant    Pressure Relief Valve    Molded-In Hinge and Padlock Holes    Empty Interior for Full Customization    Made in the USA

Related Questions and Answers

Q: 1. Will this work with a Canon Rebel T6?Is it easy to insert the camera and take pictures?

A: I imagine, I used it with a Sony A7s and the lens didn't fit snug into the housing. So it worked but it was a little struggle. As long as your lens fits the opening well it should be great.

Q: 2. Does this fit for the canon 5D mark3 with 16-35 f2.8 mark2 lens (82mm thread)? Thanks.

A: The Canon EOS 5D Mark III will fit in the DiCAPac WP-S10 Waterproof Case, but the Canon EF 16-35mm f/2.8L II USM Lens is too large and vignetting will be a problem. You should lenses with a filter size no larger than 72mm and no wider than 24mm.

Q: 3. Does it fit in the Cannon 5d mark 3 with the cannon 24-105 mm lens EF mount, 1:4?

A: I don't know if it fits a 5D mark II. It fits my 6D. What I found however is. It works better with a prime Len. Even it has pockets for fingers, it is quite difficult to manipulate the zoom.

Q: 4. I see the export compliance notification. Can I bring this case with me on a trip to Greece?

A: This unit is easily packable and does not contain metal. We took it into Canada and it received a workout when we took it through Niagara Falls. It kept my camera dry and gave us some great shots. I would recommend it. Hope you enjoy your trip!

Q: 5. Will this fit the new Canon R5?

A: It will fit or the DiCAPac Waterproof Case for Mirrorless Cameras will work as well, the lens diameter on the mirrorless case is up to 68mm and the WP-S10 will work for lenses up to 72mm in diameter.

Q: 6. Will this fit Nikon D4 with 24-70mm lens?

A: Don't know, have only used it with a Canon 70D and a Canon 18-135mm and a Tamron 28-75mm.

Q: 7. DiCAPac WP-S10 Waterproof Case will it fit a canon 60D 70-300mm lens? or 60 D with 24-105 mm zoom lens?

A: Canon 60D with 24-105mm will fit well , with 70-300mm you would not be able to zoom beyond 70mm

Q: 8. Would this fit a canon t6i with a 18-55mm lens?

A: Yes.

Q: 9. best lens recommendation? preferably not a zoom ( using a 6dm2 with grip)

A: I would recommend the Canon 35mm f/2, click the link below to view; https://bhpho.to/2CwtqCG I don't think you will have much success using the grip, it will be a tight fit and the camera controls will be out of alignment in relation to the housing.

Q: 10. does it match the 5s mark iii?

A: If you mean 5D Mark III, then yes. Best with a fixed lens.