SKB Cases designed the R-Series 3834-23 Waterproof Utility Case to withstand the most extreme and demanding shipping, handling, and working conditions on the planet. The case is offered here with an empty interior to allow for customization and for full use of the interior space. Cubed foam, layered foam, and padded dividers are available separately. The case weighs 70.1 lb / 31.8 kg and is built from LLDPE polyethylene with stainless steel latches and hinges. The case is resistant to a variety of hazards that you may encounter, such as impacts, ultraviolet (UV) radiation, solvents, corrosion, and even fungi. Pressure relief and breather valves come into play especially during air transport by regulating the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that may develop.

Airtight and Waterproof to Mil Specs    Built for Extreme & Demanding Conditions    Impact-Resistant LLDPE Polyethylene    UV/Solvent/Corrosion/Fungus Resistant    Pressure Relief & Breather Valves    Stainless Steel Latches and Hinges    Empty Interior for Full Customization

• Exterior measures: 41.5 x 26.3 x 37.5" / 1054 x 667 x 953 mm
• Hinged 4.8" / 123 mm deep lid provides easy access
• Base depth: 18" / 457 mm 

• Interior measures: 38.3 x 22.8 x 34.3" / 972 x 580 x 870 mm 
• Empty interior for full access & customized storage solutions
• Cubed foam, layered foam, padded dividers available separately

Related Questions and Answers

Q: 1. Does this fit for the canon 5D mark3 with 16-35 f2.8 mark2 lens (82mm thread)? Thanks.

A: The Canon EOS 5D Mark III will fit in the DiCAPac WP-S10 Waterproof Case, but the Canon EF 16-35mm f/2.8L II USM Lens is too large and vignetting will be a problem. You should lenses with a filter size no larger than 72mm and no wider than 24mm.

Q: 2. Would this fit an Ursa Mini Pro?

A: I am not familiar with your hardware. I got it specifically for Canon 5D3 with the 100-400 L lens, and it is sized for such a combination. They are offered in different sizes and B&H should be able to assist in choosing the right size.

Q: 3. is the dica ac WP-S10 compatible with a camera pentax k7 thank you ?

A: I do not speak English, this is a Google translation, I hope it is understood.......if it is compatible, it is for any dslr camera, you can enter any camera with a not too big lens, I have put a 6d canon with a 24-35 sigma art lens and it fits perfectly

Q: 4. There seems to be spots on the slider where it becomes more difficult to move making a jumpy motions. Is there anyway to correct this?

A: If you don't have a defective slider, the one thing you can do is drag your fingers on the rail for resistance. I use a 5d without a tripod head. I attach it directly to the slider. I wish the lock would provide the resistance I would like, but it's not consistent. to smooth out the move, I drag my fingers on the rail behind the slider as I push it. the resistance helps with the move. the one thing I thought about, but haven't tried, is to use fishing line with a weight attached to the slider and hang over the end of the rail for resistance. as long as the weight doesn't swing back and fourth, and doesn't hit the ground, it should help, but like I said, I haven't tried it yet. hope this helps.

Q: 5. Is this a directional antenna and can it be used as access point in a building with 3 floors?

A: This unit is not meant to be used as an AP. This is for long range between two points in a network.

Q: 6. Can I mount it on a tripod?

A: Yes you can. This has 1/4"-20 and 3/8"-16 threadings in the middle and on both ends of the slider.

Q: 7. DiCAPac WP-S10 Waterproof Case will it fit a canon 60D 70-300mm lens? or 60 D with 24-105 mm zoom lens?

A: Canon 60D with 24-105mm will fit well , with 70-300mm you would not be able to zoom beyond 70mm

Q: 8. what is the difference between the Tamarac anvil 23 and 27?

A: The Tamrac Anvil 23 is 17.3 inches tall and the Anvil 27 is 19.7 inches tall for the interior. All other interior dimensions are the same but because of the added height, the Anvil 27 would be able to hold a longer lens and/or more equipment.

Q: 9. Will this fit Nikon D4 with 24-70mm lens?

A: Don't know, have only used it with a Canon 70D and a Canon 18-135mm and a Tamron 28-75mm.

Q: 10. Does it fit in the Cannon 5d mark 3 with the cannon 24-105 mm lens EF mount, 1:4?

A: I don't know if it fits a 5D mark II. It fits my 6D. What I found however is. It works better with a prime Len. Even it has pockets for fingers, it is quite difficult to manipulate the zoom.