The tan Countryman E6X Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and 4-pin Hirose Connector for Sony Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 4-pin Hirose connector for direct connection to Sony DWT-B01, DWT-G01, DWT-S01, and DWT-V01 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with my canon 5

A: Yes - it doesn't work with the lower priced models - they need a straight (one) pin connector.

Q: 2. Will this remote work with a Fuji-film XT-1 if you use the vello RCC F1-2.5 cable (B&H # VERCCF12.5 MFR # RCC-F1-2.5)? Part two - is the RCC F1-2.5 cable compatible with this Vello shutter boss ll remote? Thank you

A: Yes, if you use cable B&H # VERCCF12.5, you can use this remote with the Fuji XT-1.

Q: 3. Work with Sony RX100 v?

A: Yes, this would work with the Sony Cyber-shot DSC-RX100 V

Q: 4. how do I attach to omd em1 mark iii?

A: On the right-hand side, by the grip of your Olympus OM-D EM-1 Mk III next to the memory card door, is a 2.5mm sub-mini port for the male-end of the ShutterBoss II to attach into.

Q: 5. will it work on Nikon D3400?

A: I'm sorry, I am unable to answer this question. I own Sony equipment and have not had a chance to try it on the Sony yet

Q: 6. Anyone know where I can get a PDF of the manual for the RC-C2II ? for canon.

A: Under the Overview tab, there is a link that says Guides & Manuals which you can click to view an instruction manual for the Shutterboss Version II Timer Remote Switch for Canon with 3-Pin Connection.

Q: 7. Will this work with the Sony DSC HX80?

A: Yes, the Vello ShutterBoss II Timer Remote Switch for Sony Multi-Terminal is will work with the Sony Cyber-shot DSC-HX80 to trigger the camera. This can be used for time-lapse and the like. However, timed long exposures is not possible.

Q: 8. Does it works with a68?

A: The Vello Wireless ShutterBoss II Remote Switch with Digital Timer for Sony Multi-Terminal, B&H # VERCWIIS2, has been discontinued and is no longer avaialble for purchase. The Vello Wireless ShutterBoss III Remote Switch with Digital Timer for Select Sony Cameras, B&H # VERCW3S2, would be the correct current remote that would be compatible for use with the Sony SLT-A68 Digital Camera.

Q: 9. Does it work without battery if I use the cord?Thanks :)

A: Yes it works as a shutter release without the battery and you are able to lock the shutter open by sliding the shutter button up on the remote. The intervalometer will not work unless you have the batteries installed.

Q: 10. Would the device be only working for the dedicated camera? i.e. the one that works for Nikon would not work for Fuji

A: That is correct.