The tan Countryman E6X Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and 3.5mm locking Connector for Sky Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Sky UT86P wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sky Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is the polar alignment scope illuminated?

A: Unfortunately it is not an illuminated polar scope.

Q: 2. Can you recommend a carrying case for this item?

A: This would be the best I could recommend. Lightware C6042 42" Cargo Case, Padded (Black) BH #LIC6042 • MFR #C6042 https://www.bhphotovideo.com/c/product/30895-REG/Lightware_C6042_C6042_42_Cargo_Case.html

Q: 3. Does this come with the tripod?

A: In the Box: Sky-Watcher EQM-35 EQ GoTo Mount 2 x Sky-Watcher 7.5-Pound Counterweight for EQ5, EQ6, EQ6-R Counterweight Shaft SynScan Controller with Coiled Cable 2 x Motor Assemblies with Control Box and Cables Stainless Steel Tripod with Tray Limited 2-Year Warranty

Q: 4. what is the f/stop on this unit?

A: The Sky-Watcher Classic 250P 10" Traditional Dobsonian Telescope BH #SK10TDK • MFR #S11620 has an f-stop of f/4.7

Q: 5. What Canon lenses is this compatible with? I have an EOS R5 and R3.

A: I am not sure if I understand your question. The Sky-Watcher EQM-35 EQ GoTo Mount BH #SKS30500 • MFR #S30500 is a "mount" It dose not matter what camera body or lens is attached as long as the maximum load is 22 lbs. or less.

Q: 6. Latitude range of EQM 35

A: in a 19° latitude, my mount range is from 15-65° There is risk that the counterweight shaft will hit the tripod legs if the mount is set to that low a latitude. To negate this, you will likely have to use a portable pier instead of the tripod with whatever mount you end up finding that can go that low. With the existing set up 15 degrees is the lowest.

Q: 7. What is the difference between EQM-35 Pro and this model?

A: Check this article https://www.skyatnightmagazine.com/reviews/mounts/sky-watcher-eqm-35-pro-go-to-mount/

Q: 8. Is there an adapter that we would need to purchase to use a camera on this tracking mount?

A: You can use a Vixen style plate to mount a camera such as this Losmandy: https://bhpho.to/2k556gZ

Q: 9. This question is for TELESCOPE OWNERS: I have a Canon M50 that I have attempted to connect to the scope. The connector I bought is apparently for the 1.25 eyepiece, I want to connect it directly to the 2" connector. What do I do? Also, when I did connect it via the 1.25, I could not pull the image into focus. What am I doing wrong?

A: I assume you already have a t-ring mounted to your Canon M50. My suggestion would be to use the Tele Vue SLR Prime Focus Camera Adapter for 2" Focusers BH #TE2CA • MFR #ACM-2000

Q: 10. Will it support a guide camera?

A: Yes it will, as long as your camera, lens and mount do not exceed the 22 lb weight limit.